Q-See QSDR74RTS User Manual page 27

Security Settings - Trusted Sites Zone
Security Settings - Trusted Sites Zone
Settings
.NET Framework
Loose XAML
Disable
Enable
Prompt
XAML browser applications
Loose XAML
Disable
Enable
Prompt
XPS documents
Loose XAML
Disable
Enable
Prompt
*Takes effect after you restart Internet Explorer
Reset custom settings
Reset to:
Medium-high (default)
Medium-high (default)
Medium-low
Low
IMAge 23
To connect to the DVR from the remote computer you would then open an Internet Explorer
browser window and enter the internet IP of your router that you got by going to www.
myipaddress.com (you have to do this from a PC that connect to same Router as your DVR).
Note: If you cannot use HTTP port 80 or 9000 because the port is being used by another program, or it
is being blocked by your service provider, you can use another port in the same range. If you do so then
you need to forward the IP address of the router to the other port, change the port in the DVR NETWORK
settings, and you need to add the port number after the IP address. For example, if you set the HTTP port
as 82, you need to enter the IP address as 192.168.0.25:82. After you have forwarded the ports you can
verify that the ports are open by going to canyouseeme.org from a computer that is attached to the same
router as the DVR.
Once you able to login, you will get the login screen, by default there is no password. Just push the Login
Button .
Note: If you still have problems connecting remotely: Anti-virus programs could also block the ActiveX
control, if you still have a problem try closing them. Other plug-ins could also block it. Close firewalls in
Windows and in the router if applicable. If you run Windows Vista or Windows 7, you will need to disable
User Account (UAC).Follow this link for instructions:
http://www.howtogeek.com/howto/windows-vistadisable-user-account-control-uac-the-easy-way-on-
windows-vista/
If you have a router plugged into another router, for example, if you have the DVR attached to
a router which is attached to DSL or Cable router, you may need to forward port 80 and 9000
(or whatever ports you are using) on the DSL or Cable router to the IP address of the router
that the DVR is attached to, so that router can then forward the port to the DVR. Please refer
to the PORT FORWARDING section above on how to get instructions on how to forward the
port on the other router.
X
Internet Properties Internet Properties
Security
General
Home page
To create home page tabs, type each address on its own line.
Browsing history
Delete temporary files, history, cookies, saved passwords,
and web form information.
Search
Change search defaults.
Tabs
Change how webpages are displayed in
tabs.
Reset...
Appearance
Colors
OK Cancel
?
Privacy Content Connections Programs Advanced
http://www.q-see.com
Use Current Use Default Use Blank
Delete browsing history on exit
Delete... Settings
Settings
Settings
Languages Fonts Accessibility
Apply
OK Cancel
IMAge 24A
X
Internet Properties Internet Properties Internet Properties Internet Properties
Security
General Privacy Content
General Security Privacy Content
Settings
Home page
Security To create home page tabs, type each address on its own line.
Allow active content from CDs to run on My Computer*
http://www.q-see.com
Allow active content to run in files on My Computer*
Allow software to run or install even if the signature is invalid
Check for publisher's certificate revocation
Check for server certificate revocation* Use Current
Check for signatures on downloaded programs
Browsing history
Do not save encrypted pages to disk
Delete temporary files, history, cookies, saved passwords,
Empy Temporary Internet Files folder when browser is clos
and web form information.
Enable DOM Storage
Enable Integrated Winsows Authentication*
Delete browsing history on exit
Enable memory protection to help mitigare online attacks*
Enable native XMLHTTP support
Search Enable SmartScreen Filter
Change search defaults.
*Takes effect after you restart Internet Explorer
Tabs
Change how webpages are displayed in
Reset Internet Explorer settings
tabs.
Resets Internet Explorer's settings to their default
condition.
Appearance
You should only use this if your browser is in an unusable state.
Colors Languages
Some settings are managed by your system administrator.
OK OK
IMAge 24B
? ?
X X
Connections Programs Advanced
Connections Programs Advanced
Use Default Use Blank
Delete... Settings
Settings
Restore advanced settings
Settings
Reset...
Reset...
Fonts Accessibility
Apply Apply
Cancel Cancel
27