Camera Setup; Set Camera Name And Position; Enable Live Viewing; Enable Auto-Sequence - Q-See QSDR74RTS User Manual

CAMERA SETUP

Set Camera Name and Position

To set up the display name and position for each camera, complete the following instructions:
1. From the Main Menu, select the camera icon
2. From the camera setup interface (
IMAGE 7
characters long by highlighting the field next to the channel under the NAME column.
To enter letters, left click the mouse in the field to access the keyboard drop down.
3. To select the camera's position on the screen, select the arrow under the POSITION
column and select preference
4. Complete steps 2 and 3, for each camera
5. Click APPLY, then EXIT

Enable Live Viewing

From the camera setup interface (
IMAGE 7
1. From the Main Menu, select the camera icon
2. From the camera setup interface (
IMAGE 7
and select preference from the drop down menu
3. Complete step 2, for each camera
IMAGE 7
18
), assign a name for each of camera, up to 8
), enable live viewing for each camera.
), select the arrow under the LIVE column
IMAGE 8

Enable Auto-Sequence

To set the system to automatically rotate the screen view image for each camera:
1. From the camera setup interface, select the AUTOSEQ button
2. The AUTO ROTATION sub menu will appear (
3. Select the amount of view time, from 0 to 10 seconds, for each camera from
the drop-down list.
4. To set the rotation time for all cameras to 5 seconds, select DEFAULT.
5. When finished selecting times, select APPLY and then EXIT to close the AUTO
ROTATION menu
Note: changes will only be saved, when you select APPLY before exiting

Setup Color Hue, Brightness, Contrast and Saturation

To adjust the image brightness, saturation, contrast and hue settings for each camera, from
the camera setup interface:
1. Under the COLOR column, select the SETUP button
2. The COLOR SETUP sub menu will appear (
3. Make desired changes by sliding the vertical line along each axis
4. Select DEFAULT to reset all values to the original factory installed settings
5. To close the window without applying changes, select EXIT, before selecting APPLY
6. To save changes, select APPLY
7. A prompt will appear to save your settings, select OK in order for the changes to take effect.
Note: changes will only be saved, when you select APPLY before exiting
)
IMAGE 8
IMAGE 9
)
IMAGE 9
19