Changing The Display Features Using The Select Key; Keypad Tips - Precor EFX5.33 Owner's Manual

page 28
CALORIES PER MINUTE: Indicates the approximate number of calories being
burned per minute.
WATTS: Displays the current mechanical energy being generated by the machine.
METS: Displays the metabolic units associated with your workout.

Changing the Display Features Using the SELECT Key

The Select keys let you choose which feature(s) appears on the display. When you
enter a course, TIME and PROFILE features are preselected for you. As you work
out, TIME indicates the amount of time you've spent in your work out. The blinking
column in the course profile indicates progress along the course.
Each Select key affects four different display features. The left SELECT [1] key, causes the
indicator light to appear next to TIME, STRIDES, STRIDES/MINUTE and CALORIES. The
right SELECT [2] key, highlights PROFILE, CALORIES/MINUTE, WATTS and METS.
You can determine which features appear by turning the indicator lights, next to the
item, on or off. If the indicator light is off, the item will not appear in the display. If
more than one item per column is highlighted, the EFX will scan between the
selected features and skip over the ones that are not highlighted.
To turn the indicator lights on or off, take the following steps:
1. Press the appropriate SELECT key until the indicator next to the item is highlighted.
2. Press and hold the SELECT key for at least 2 seconds. The indicator light begins
to blink. The light continues blinking until you release the key.
Note: If you are turning an item "on," the indicator light next to the item remains lit
and the featured information appears on the display. If more than one item per
column is highlighted, the EFX scans through the next item after five seconds.

Keypad Tips

• Accurate entries are required or features such as Smart Rate
• During the Setup prompts, you can change the information being displayed by
pressing any or key. (Resistance levels are not affected until the course begins.)
• Press Enter to select the information being displayed.
• Pressing Quick Start at the Precor banner bypasses further selections and
displays the Manual course. Default values apply (see QUICK START below).
®
The Smart Rate display does not appear.
Note: Quick Start may be pressed any time during the Setup prompts. Refer to
The Setup Mode and the Quick Start Feature on page 22.
• A time-out occurs during the Setup prompts if the EFX detects no key presses
for ten minutes. The display returns to the Precor banner.
• Press Reset to return to the Precor banner.
Important: The keys on the keypad are touch-sensitive. A light "touch" is all that
is required to activate the key function.
Special Keypad Functions at the Precor Banner
When you first turn the unit ON, the Precor banner "PRECOR WORK OUT
SMARTER" appears in the center display window. This banner indicates that the EFX
is ready to accept user entries. You can perform a variety of tasks from the banner
using different key presses:
Note: Key presses to the
1 key — selects User I.D. #1. The last course accessed by User 1, along with the
workout time, weight, and age is retrieved from memory.
or key are ignored when the banner is being displayed.
® will not work properly.