Unpacking The Efx ® 5.33; Optional Equipment; Acquiring The Appropriate Tools - Precor EFX5.33 Owner's Manual

CAUTION: This unit weighs over 231
pounds (104 kilograms). To avoid injury
and to ensure the safety of the unit and
yourself, get adequate assistance before
unpacking your EFX ® . Break down the
container's side walls before removing
anything from the box.
page 10
Unpacking the EFX ® 5.33
The EFX5.33 is carefully tested and inspected before shipment. Precor ships the unit
in several components, as listed below:
• base frame assembly
• upright support
• base frame stabilizers (left and right)
• owner's manual and hardware kit

Optional Equipment

®
An additional POLAR chest strap can be purchased by calling Retail Sales at 1-800-
786-8404 or visiting the Precor web site at www.precor.com.
Carefully unpack the pieces of the unit and lay them on the floor near the
location where you plan to use the EFX.

Acquiring the Appropriate Tools

Obtain the following tools before assembling the EFX.
Wire cutter – for cutting wire ties
Phillips head screwdriver
Two 9/16" combination wrench (open-end and crescent)
SAE Standard socket set with socket extension (for 1/2" and 9/16" bolts)
Rubber mallet
• left and right handlebars
• display console assembly
• bracket cover