Using The Efx; Removing The Locking Pin - Precor EFX5.33 Owner's Manual

3
CAUTION: Do not allow children on the
EFX. Be aware that injuries can occur from
the roller arm and handlebar movement.
Always use the locking pin to secure the
roller arm when the EFX is not in use.
Diagram 17

Using the EFX

The EFX is designed so that you can work out with minimal instruction. The directions
on the console and the prompts on the display help guide you through your entire
workout session. A special feature of the EFX is its ability to retain user I.D. information.
Each person that uses the EFX (up to two people) can have their own user I.D. and
personalize their workout session. Refer to User I.D. on page 26.
When you work out on the EFX, you can choose which features appear on the
display. Once your workout is complete, the course information, the workout time, your
weight, and your age are stored with your user I.D. By selecting the same user I.D.,
prior to your next workout, the information about your preferred course, workout time,
weight, and age is retrieved from memory.
Your EFX also contains a QUICK START feature which lets you bypass the Setup
prompts and start your workout immediately. Refer to The Setup Mode and the Quick
Start Feature on page 22.
This section provides workout tips and information about:
• safety features
• using the handlebars
• quick steps to working out

Removing the Locking Pin

The locking pin secures the roller arm and keeps it from traveling up or down the
ramp. Pull firmly on the pin to slide it out of the ramp. A lanyard is attached to the
locking pin and ramp. Refer to Diagram 17.
Store the locking pin underneath the ramp once it is removed from the roller arm. See
inset in Diagram 17.
EFX5.33 Locking pin.
Insert the locking
pin when you are
finished working
out or when you
leave the EFX for
an extended
length of time.
Storage location
®
• cooling down after a workout
• using the QUICK START feature
• pause and exit features
page 19