Table of Contents
Advertisement
THE FIRST TIME YOU OPERATE
YOUR TV
STEP 1. CONNECT
THE POWER
Plug your TV into an unswitched AC power source.
The switched AC outlets found on some video equipment
will not continue supplying power to the TV once the equip-
ment is turned off. If the power to the TV is interrupted,
you will have to set the clock in the TV to the current time.
Do not plug TV into switched outlet on cable-TV decoder
Do not plug "IV into switched outlet on a VCR
STEP 2. TURN TV ON
Turn the TV on by pressing OFF-ON.
STEP 3. USE AUTO CH. (Channel)
SEARCH
When your TV is first powered up you will see the AUTO
CH. SEARCH
reminder display. AUTO CH. SEARCH
t'mds all available channels and stores them in memory for
access by CHANNEL
(CH) Up/Down. To activate AUTO
CH. SEARCH,
press ADJUST
(ADJ) Left/Right. When
the search is complete, you can watch the TV program
of
your choice.
NOTES:
1. The AUTO
CH.
SEARCH
reminder
display
ap-
pears each
time you turn on your TV until it has
been used at least once.
2. Antenna
or cable
must be connected
to TV before
you use AUTO
CH. SEARCH.
SETUP MENU
• , AUTO CH. SEARCH
CH. ADD/DEL
TUNING BAND
AUTO FINE TUNE
CLOCK
SET
CAPTIONS
CH. BACKGROUND
START
Auto Ch. Search
Reminder
Display
DETERMINING TUNING BAND
Determining
Tuning Band
TUNING BAND IS
CH _
IS FOUND
While Searching
for
Active Channels
f
!
_trlD ell. SEARO-I HAS O3MPLZI_
TUNING RAND IS
1_
CHANNELS FOUND
CH2
STEREO
When Search is
When Returning to
Complete
Channel/Audio
Display
STEP 4. USE OTHER
OPTIONS
You may want to consider using the following options:
•
Program
the channels
accessed
by using CHANNEL
(CH) Up/Down.
Refer to CH. ADD/DEL
option of the
"Setup Menu" section of this operating guide for details.
Set the clock in the TV. Refer to the CLOCK SET option
of the "Setup Menu" section of this operating
guide for
details.
2589-o
2 - 1
Advertisement
Table of Contents
