Table of Contents
Advertisement
MAINTENANCE
AND TROUBLESHOOTING
VCR MODE
CHART
2. OUTPUT
TO TV FROM AUDIO/VIDEO
JACKS
ON VCR
VCR POWER
IS OFF
START)
HERE
The operating mode of your VCR determines what type of
program source is provided, and whether the audio is stereo
or monaural. Use this flow chart to determine the operating
status of your VCR, so that you know when to select the VCR
(or auxiliary) source on your TV.
Use the LEFT and RIGHT
AUDIO output jacks on the
VCR to get stereo sound. Select STEREO
audio mode of
operation for the TV by using theoptions
on the AUDIO
Menu of the TV. You must use the VIDEO output when
the LEFT and RIGHT
AUDIO outputs are used.
VCR POWER
IS ON
NO OUTPUT IS
PROVIDED
AT THE
AUDIO AND VIDEO
OUTPUT JACKS
@ @@
VIDEO
R
L
OUT
AUDIO
t
OUT
Stereo VCR output to "IV
NO
YES
VCR TUNER
SELECTS
CHANNELS
TO
BE SEEN ON TV
VIDEO TAPE
PROVIDES
PROGRAM
TO
BE SEEN ON "IV
Ir
Ir
1. TV channel or tape playback is provided at the video
output jack.
2. Stereo audio is provided at the audio output Jacks If
stereo Is present on the channel being received or on
the tape being played.
©
VIDEO
OUT
I
©©
R
L
AUDIO
OUT
]
Stereo VCR output to TV
vcru_oD_
U -- 4
Advertisement
Table of Contents
