THE FIRST TIME YOU OPERATE YOUR TV
STEP 1. MAKE BASIC CONNECTION
TO TV
There are four basic hook ups to your
TV;
outdoor antenna
(or master antenna) with or without VCR, and cable-TV
system with or without VCR. Select the hook up that best
fits your needs. See the following diagrams.
Your connection is made to the VHF-UHF/C,M3LE
jack
on the back of the TV. This.lack accepts 75-ohm cable ter-
minated in an F-type male connector. You may want to do
the hook-up yourself, or call a TV service r, e chnician, or a
cable company.
Ao
Antenna Connection
to TV
If You Have a Round Antenna Wire:
Connect
the 75-ohm
round
antenna
wire into the
VHF-UHF/CABLE
jack on the TV.
If You Have a Flat, Twin-Lead
Antenna Wire:
Use the 300/75 ohm adaptor
included
with the TV.
Hook 'up the ends of the wire to the adaptor
and plug
it into the VHF-UHF/CABLE
jack.
ANTENNA
q
T
C>
VHF-UHF/CABLE
(75 ohm ktput)
Connection
Center
on Back of TV
B.
Antenna Connection
to VCR and TV
1. Antenna Hook Up
Connect
the 75-ohm
round
antenna
wire
into
ANTENNA
IN jack on VCR.
2. VCR Hook Up
Connect
ANTENNA
OUT wire from VCR into
VHF-UHF/CABLE
jack on TV.
ANTENNA
t
,
VCR
VHF-UHF/CABLE
(75 ohm Input)
Connection
Center on Back of TV
z489-A
1 -- 1