Table of Contents
Advertisement
GETTING TO KNOW YOUR REMOTE CONTROL
VCR OPERATIONS
The following functions and operations apply to Zenith
VCR models built after 1988. The remote control supplied
with your VCR may have keys not duplicated
on the new
remote. If these functions are desired, the original remote
control will have to be used.
For complete details on how to operate your Zenith VCR,
refer to the operating guide supplied with it.
The remote control must be in the VCR mode to operate
your VCR.
t
MODE
For optimum performance,
point the
remote control toward your VCR.
Press repeatedly
to select the
[1
VCR mode of operation.
VCR
Lights when VCR mode of operation
is selected,
s
MENU, SELECT, ADJUST and QUIT |
Used with the on-screen menus and
programming options of the VCR. See
VCR operating guide for details
Numbered Buttons
/
Used to select a TV channel through
|
the VCR. Also, used to set the timer in
the VCR, and to enter programming
information.
ENTER
Used with the numbered buttons to
select a TV channel through the VCR.
AM/PM
Used to set timer during programming.
MEMORY
Used to activate the VCR MEMORY
feature. See VCR operating guide for
details.
RECORD, STOP, PAUSE, SEARCH,
REW, PLAY and F FWD
Used for tape recording and playback
functions. See the VCR operating guide
for details.
/
CZD
n..A._.tl_
N]
CHANNEL
VOLUME
N
CZD
_RCH
TV/_R
Remote Control MBR3420
VCR Operations
/
I
/
OFF/ON
L',cd to turn VCR ON or OFF.
FLASllBK
(Flashback)
Prcs._ during VCR playback to view the
channel tuned by the VCR.
CllANNEL Up/Down
U._d to select a TV channel by going
Up or Eh_11 through channels from the
VCR.
TINIER
Actuates
TIME RECORD
on
some VCRs.
"i'V'VCR
U._d to select the source of the
prtgrams
sccn on the TV. Switches the
VUR between TV mode and VCR
mode. "IX"Mode: channels are selected
through the TV. VCR Mode: channels
or tape operation
are selected through
the VCR.
259"A
4 -- 3
Advertisement
Table of Contents
