Table of Contents
Advertisement
THE FIRST TIME YOU OPERATE
YOUR TV
STEP 1. CONNECT
THE POWER
Plug your TV into an unswitched AC power source.
The switched AC outlets found on some video equipment
will not continue supplying power to the TV once the equip-
ment is turned off. If the power to the TV is interrupted,
you will have to set the clock in the TV to the current time.
Do not plug TV into switched outlet on cable-TV decoder
A
Do not plug '1_/into switched outlet on a VCR
STEP 2. TURN TV ON
Turn the TV on by pressing OFF-ON.
STEP 3. USE AUTO SEARCH
When your TV is first powered up you will see the AUTO
CH. SEARCH
reminder display. AUTO CH. SEARCH
finds all available channels and stores them in memory for
access by CHANNEL
(CH) Up/Down. To activate AUTO
CH. SEARCH,
press ADJUST
(ADJ) Left/Right. When
the search is complete, you can watch the TV program of
your choice.
NOTES:
1. The AUTO
CH. SEARCH
reminder
display
ap-
pears
each
time you turn
on your TV until
it has
been used at least once.
2. Antenna
or cable must be connected
to TV before
you use AUTO
CH. SEARCH.
AUTO CH. SEARCH
PRESS ADJUST
KEY TO START
Auto Ch. Search
Reminder Display
SEARCHING
FOR
CHANNELS
While Searching for
Active Channels
AUTOCI-LSEARCH HAS O3MPI.EVEE
TUNING BAND IS
DCHANNELS
FOUND
When Search is
Complete
CH 2
When Returning to
Channel Display
STEP 4. USE OTHER OPTIONS
You may want to consider using the following options:
•
Program
the channels
accessed
by using CHANNEL
(CH) Up/Down. Refer to CH. ADD/DEL
option of the
"Setup Menu" section of this operating guide for details.
•
Set the clock in the TV. Refer to the CLOCK SET option
of the "Setup Menu" section of this operating guide for
details.
2s73-o
2 -- 1
Advertisement
Table of Contents
