Table of Contents
Advertisement
THE FIRST TIME YOU OPERATE YOUR TV
STEP 1. CONNECT
THE POWER
Plug your "IV into an unswitched AC power source.
The switched AC outlets found on some video equipment
will not continue supplying power to the TV once the equip-
ment is turned off. If the power to the TV is interrupted,
you will have to set the dock in the TV to the current time.
Do not plug TV into switched outlet on cable-TV decoder.
Do not plug TV into switched outlet on a VCR.
STEP 2. TURN TV ON
Turn the TV ON by pressing OFF-ON.
STEP 3. SELECT
YOUR VIEWING
SOURCE
A TV source refers to the equipment
connected to the con-
nection center on the back of your TV. For example, anten-
na, cable-TV, VCR, video disc player, etc. You can select
what source supplies the picture and sound to your TV by
pressing SOURCE
on your remote control and viewing the
SOURCE MENU.
To Access SOURCE MENU
1.
Press SOURCE
on the remote control
to view the
SOURCE
MENU.
.
Press SOURCE
repeatedly
until the correct anten-
na or cable-TV
source
is highlighted,
then
press
ENTER.
3.
Press ENTER again to return to normal viewing.
_SOURCE
MENU_
ANT/CABLE 1
ANTICABLE 2
VIDEO 1
VIDEO 2
S-VIDEO 1
NOTES: The correct antenna or cable-TV source must be
selected before STEP 4 in order for the AUTO CH.
SEARCH to correctly find available channels
For information about sources, see "Source Menu" section
of this operating guide.
STEP 4. USE AUTO CH. (Channel)
SEARCH
When your TV is fh'st powered up, you will see the SETUP
MENU with AUTO CH. SEARCH
highlighted. AUTO
CH. SEARCH finds all available channels from the
selected source and stores them in memory for access by
CHANNEL Up/Down.
To activate AUTO CH. SEARCH,
press ADJUST
(ADJ) Left/Right. When the search is com-
plete, you aan watch the TV program of your choice.
NOTES:
1.
The SETUP
MENU
with AUTO
CH. SEARCH
highlighted
will appear
each time you turn on your
TV until AUTO
CH. SEARCH
has been used at
least once.
2.
The AUTO
CH. SEARCH
message
appears
only if
one of the ANT/CABLE
sources
is selected.
3.
Your antenna
or cable must be connected
to the TV
before you use AUTO
CH. SEARCH.
SETUP MENU
• .> AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
START
Setup Menu with Auto Ch. Search Highlighted
258o
2-1
Advertisement
Table of Contents
