Table of Contents
Advertisement
GETTING TO KNOW YOUR REMOTE CONTROL
INTRODUCTION
The multi-brand
remote control supplied with your new
Zenith TV allows you to operate most models of infra-red
(IR) remote-controlled
TVs, VCRs, and cable-TV
decoders, even if they are all different brands. In this way, it
takes the place of the several remote controls previously
needed.
Your multi-brand
remote has already been programmed
to
operate your new Zenith TV, a Zenith manufactured
cable-
TV decoder and a Zenith VI-IS VCR. It must be
programmed
to operate other brands of equipment.
The following instructions
are for operation of Zenith
equipment. The instructions for using this remote with
non-Zenith equipment are in the section entitled "Program-
ming the Remote Control".
CHOOSING
OPERATING
MODE
To use the remote to operate your TV, a cable-TV decoder
or a VCR, you must first choose the mode of operation
of
the remote control. To select the TV, CABLE or VCR
mode of operation,
press MODE repeatedly until the cor-
responding
indicator lights.
Some controls on the remote, like PLAY and VOLUME,
will always operate the VCR or the TV. Whether other keys
operate the TV or the VCR depends on which mode of
operation the remote control is in. For example, OFF-ON
will turn the VCR on and off while the remote control is in
the VCR mode. It will turn the TV on or off while the
remote control is in TV mode.
Operating
MODE switch
and indicators
Menu operations
on TV
and some VCRs
Numbered buttons for
channel selection and
other uses
NOTE: See following pages
for operating
instructions.
f--_3 C-_--1
ADJ.
_
SzLECT
QUtT
©®®
®®®
®®®
C:ZD (Z:D
C::::_
A
B
_
{::::::_ {:::Z_
R£COI_
STOP
R£W
_
F"F'WD
OFF ON
O
5c,
FLA,S_-IBK
[]
CHANNEL
VOLUME
$F.ARCH
CZD
TV/VCR
[
MRR3420
!
l,
t-
t-
Controlled
device OFF/ON
Special features on TV and
some VCRs
Channel Up/Down for TVs,
VCRs and cable
Volume Up/Down
for TV
Special features on some
TVs and some VCRs
-_o_,
4 - 1
Advertisement
Table of Contents
