Table of Contents
Advertisement
SETUP MENU
TUNING
BAND
Purpose
Allows for setting the TV tuner to match your antenna or
cable-TV system.
If you are having difficulty tuning channels, the TUNING
BAND
may have to be set manually to match your viewing
needs.
Before Using TUNING BAND
Connect and turn ON all external equipment,
such as cable-
TV decoder, VCR, etc. Use AUTO
CH. SEARCH
if not
previously used.
NOTE: TUNING
BAND is not displayed while AUX chan-
nel is being used.
To Use TUNING BAND
1. TUNING
BAND
should be selected
if you followed
the "Basic
Menu
Operation"
given
in the "On-
Screen
Menus"
section.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
-_ TUNING BAND
AUTO RNE TUNE
CLOCK
SET
CAPTIONS
CH. BACKGROUND
BROADCAST
Selecting Tuning Band
2. Press
ADJUST
(ADJ)
Left/Right
to select
the
desired
tuning band, as follows:
•
BROADCAST
is used for standard
"over-the-air"
broadcasts.
•
Cable - CA'IV is used for most standard
eable-TV
(CATV) systems.
•
Cable - HRC is used for cable-TV systems that use
HRC (Harmonically
Related Carrier).
•
Cable - ICC is used for cable-TV systems using ICC
(Incremental
Coherent Carrier).
Available Channels
per Band
The channels that are available in the broadcast
and cable
tuning bands are shown below:
BROADCAST Band
VHF 2 to 13
UHF 14 to 69*
*
Channels above 69 are not selectabl¢.
CA'IV, HRC and ICC Bands
1 to 125"*
** Channels above 125 may not be selectable.
When Some Channels Are Not Clear
If some channels are not clear, change the AUTO FINE
TUNE. You may have to try different TUNING
BAND and
AUTO FINE TUNE settings until you get a clear picture,
channel-to-channel.
Refer to the AUTO FINE TUNE op-
tion for details.
AUTO FINE TUNE
Purpose
Lets your TV compensate
for variations in broadcast and
cable-TV frequencies.
If you are having difficulty tuning channels, the AUTO
FINE TUNE may have to be set manually to match your
viewing needs.
Before Using AUTO FINE TUNE
Connect and turn ON all external equipment,
such as cable-
TV decoder, VCR, etc.
NOTE:
AUTO FINE TUNE is not displayed while AUX
channel is being used.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
TUNING BAND
--_AUTO RNE TUNE
CLOCK SET
CAP'[IONS
CH. BACKGROUND
RXED
To Use AUTO FINE TUNE
1. AUTO
FINE TUNE should
be selected
if you fol-
lowed
the "Basic
Menu
Operation"
given
in the
"On-Screen
Menus" section.
2. Press
ADJUST
(ADJ)
Left/Right
to select
the
desired mode of operation,
as follows:
•
FIXED is used to receive "over-the-air"
TV stations,
and with many cable TV systems.
•
SEARCH
is used only when the TV must search to
fred the frequency being received, such as when used
with certain VCRs and video game controllers.
When Some Channels
Are Not Clear
If some channels are not clear, change the TUNING
BAND. You may have to try different AUTO FINE TUNE
and TUNING BAND settings until you get a consistently
clear picture, channel-to-channel.
Refer to the TUNING
BAND option for details.
Selecting
Auto Fine Tune
2_o
7 - 3
Advertisement
Table of Contents
