Yamaha RX-V1400 Owner's Manual page 9

_ @00N RX-VI40(IU EN.book Page 5
IIJI_T|I:[OII_."Ir__y_T/II[II, lhlII_I[O]_I
+
Thursday, July 10, 2003 12:17 AM
O INPUT MODE
Sets the priority (AUTO, DTS, ANALOG) for the type of
signals received when one component is connected to two
or more of this unit's input jacks (see page 34). Priority
cannol be set when MULTI CH INPUT is selecled as 1he
input source.
@ OPTIMIZER MIC jack
Use to connect and input audio signals from the supplied
microphone for use with the AUTO SETUP function (see
page 24).
0 AIBICID/E
Selects one of the 5 preset station groups (A Io E).
O PRESET/TUNING
Selects preset stalion number 1 to 8 when the colon (:) is
displayed next to the band indication in the front panel
display,
Selects the tuning frequency when the colon (:) is not
displayed.
(_, SILENT (PHONES jack)
Outputs audio signals for private lislening with
headphones. When you connect headphones, no signals
are output to the OUTPUT jacks or Io the speakei:s.
All Dolby Digital and DTS audio signals are mixed down
to the left and right headphone channels.
•
VIDEO AUX jacks
Input audio and video signals from a portable external
source such as a game console. "Ib reproduce source
signals from these jacks, select V-AUX as the input
source.
• U.K. and Europe models only
RDS MODF-JFREQ
Press this button when the unit is receiving an RDS stafion
to cycle the display mode between the PS mode, I:vI'Y
mode, RT mode, CT mode (if the station offers those RDS
data service) and/or the fi'equency display mode.
EON
Press this button to select a radio program type (NEWS,
INFO, AFFAIRS, SPORT) to tune in automatically.
@ PTY SEEK MODE
Press this button to set the unit Io the IYI'Y SEEK mode.
O PTY SEEK START
Press this butlon to begin searching for a station after the
desired program type has been selecled in the l:Vl'Y SEEK
mode.
• Opening and closing the front panel
door
When you want to use the controls behind the front panel
door, open the door by gently pressing on the lower part of
the panel. Keep the door closed when not using these
controls.
TONE CONTROL
Use to adjust the bass/treble balance for the front left/right
and center channels (see page 31).
@ PROGRAM
Use to select sound field programs or adjust bass/treble
balance (in conjunction with TONE CONTROL).
@ STRAIGHT/EFFECT
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakex_s without
effect processing.
+
To open, press gently on the lower part of the panel.