1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX-V1200 RDS
  6. Owner's manual

Yamaha RX-V1200 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for RX-V1200:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
RX-V1200
AV Receiver
OWNER'S MANUAL
IMPORTANT
Please record the serial number of this unit in the
space below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner's Manual in a safe place for future
reference.
U

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX-V1200

Summary of Contents for Yamaha RX-V1200

  • Page 1 RX-V1200 AV Receiver OWNER’S MANUAL IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future...

  • Page 2: Safety Instructions

    CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage”...
  • Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables.
  • Page 4 This Class B digital apparatus complies with Canadian ICES-003. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

  • Page 5: Table Of Contents

    INTRODUCTION INTRODUCTION CONTENTS ... 1 FEATURES ... 2 GETTING STARTED ... 3 Checking the Package Contents ... 3 Installing Batteries in the Remote Control ... 3 CONTROLS AND FUNCTIONS ... 4 Front Panel ... 4 Remote Control ... 6 Using the Remote Control ... 7 Front Panel Display ...

  • Page 6: Features

    N Dolby Pro Logic/Dolby Pro Logic N Dolby Digital/Dolby Digital Matrix 6.1 Decoder N DTS/DTS ES Matrix 6.1, Discrete 6.1, DTS Neo: 6 Decoder N CINEMA DSP: Combination of YAMAHA DSP Technology and Dolby Pro Logic, Dolby Digital or DTS N Virtual CINEMA DSP...

  • Page 7: Getting Started

    Checking the Package Contents Check your package to make sure it has the following items. Batteries (4) Remote control (AAA, R03, UM-4) TRANSMIT RE–NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP 6CH INPUT PHONO TUNER V-AUX CBL/SAT MD/TAPE CD-R D-TV/LD VCR 1 VCR2/DVR SELECT Indoor FM antenna...

  • Page 8: Controls And Functions

    CONTROLS AND FUNCTIONS Front Panel NATURAL SOUND AV RECEIVER STANDBY SPEAKERS BASS PROCESSOR EXTENSION DIRECT STANDBY/ON Turns on and sets this unit in the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound.
  • Page 9 STEREO/EFFECT Switches the normal stereo or DSP effect reproduction. When STEREO is selected, 2-channel input signals are directed to the main left and right speakers without effect sounds. All Dolby Digital and DTS audio signals except for the LFE channel are mixed down to the main left and right speakers.

  • Page 10: Remote Control

    CONTROLS AND FUNCTIONS Remote Control This section describes the controls and their functions of the remote control. Make sure that the AMP mode is selected before starting operation. See “REMOTE CONTROL FEATURES” on pages 42 to 51 for operating other components with the remote control. TRANSMIT RE–NAME CLEAR...

  • Page 11: Using The Remote Control

    o SELECT k /n Selects the another component to control independently from the input that has been selected by pressing an input selector button. p AV POWER Turns on and off the power of the component selected by the input selector button. a AMP Selects AMP or other component selected by the input selector button.

  • Page 12: Front Panel Display

    CONTROLS AND FUNCTIONS Front Panel Display V AUX VCR2/DVR DTS Neo MATRIX VIRTUAL MOVIE THEATER DISCRETE DIGITAL SILENT PRO LOGIC 1 Processor indicators When any function of DSP, DTS, MTRIX DISCRETE, VIRTUAL, g, 6.1/ES, and activated, its indicator lights up. Input source indicator Shows the current input source with underneath.

  • Page 13: Rear Panel

    Rear Panel AUDIO AUDIO VIDEO DIGITAL OUTPUT S VIDEO OPTICAL TAPE (PLAY) MD/TAPE D-TV CD-R (REC) /SAT (PLAY) CD-R CD-R (REC) VCR 1 D-TV PHONO VCR 2 /DVR MAIN SURROUND ZONE 2 OUT /SAT COAXIAL MONITOR OUT CENTER WOOFER S VIDEO DIGITAL INPUT 6CH INPUT DIGITAL OUTPUT jacks...

  • Page 14: Preparation

    LFE (low-frequency effect) channel with high fidelity when the Dolby Digital signal or the DTS signal is played back. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction. SPEAKER SETUP...

  • Page 15: Connecting The Speakers

    Connecting the Speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
  • Page 16 (U.S.A. model) I SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack if they are assigned to this jack.

  • Page 17: Impedance Selector Switch

    I IMPEDANCE SELECTOR switch WARNING Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit may be damaged. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position.

  • Page 18: Connections

    • When you connect other YAMAHA audio components (such as a tape deck, MD recorder and CD player or changer), connect them to the jack with the same number labels as !, #, $ etc. YAMAHA applies this labeling system to all its products.
  • Page 19 OPTICAL OUTPUT AUDIO OUTPUT TV/digital TV or LD player S VIDEO OUTPUT DIGITAL OUTPUT OPTICAL TAPE CD-R CD-R INPUT demodulator COAXIAL DIGITAL INPUT S VIDEO OUTPUT AUDIO Cable TV or OUTPUT Satellite tuner COAXIAL OUTPUT indicates signal direction indicates left analog cables indicates right analog cables indicates optical cables indicates coaxial cables...

  • Page 20: Connecting Audio Components

    CONNECTIONS Connecting Audio Components I Connecting to digital jacks This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.
  • Page 21 OPTICAL INPUT MD recorder or tape deck INPUT OPTICAL OUTPUT OUTPUT CD player COAXIAL OUTPUT (U.S.A. model) OUTPUT Turntable indicates signal direction indicates left analog cables indicates right analog cables indicates optical cables indicates coaxial cables OPTICAL INPUT OUTPUT OUTPUT DIGITAL OUTPUT AUDIO AUDIO...

  • Page 22: Connecting To An External Amplifier

    Rear channel line output jacks. SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack if they are assigned to this jack.

  • Page 23: Connecting The Power Supply Cords

    Connecting the Power Supply Cords AC IN MPEDANCE SELECTOR SET BEFORE POWER ON AC OUTLETS 4ΩMIN. /SPEAKER MAIN A OR B: A+B: 8ΩMIN. /SPEAKER CENTER 6ΩMIN. /SPEAKER REAR CENTER : 6ΩMIN. /SPEAKER REAR 6ΩMIN. /SPEAKER MAIN A OR B: 8ΩMIN. /SPEAKER A+B: 16ΩMIN.

  • Page 24: Turning On The Power

    CONNECTIONS Turning on the Power When all connections are completed, turn on the power of this unit. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY PRESET/ PRESET TUNING A/B/C/D/E TUNING /TUNING FM/AM MEMORY MODE TUNER SPEAKERS BASS PROCESSOR EXTENSION...

  • Page 25: On-Screen Display (Osd)

    ON-SCREEN DISPLAY (OSD) You can display the operation information for this unit on a video monitor. If you display the SET MENU and DSP program parameter settings on a monitor, it is much easier to see the available options and parameters than it is by reading this information on the front panel display.

  • Page 26: Speaker Mode Settings

    This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings.

  • Page 27: Adjusting The Speaker Output Levels

    ADJUSTING THE SPEAKER OUTPUT LEVELS This section explains how to adjust the speaker output levels by using the test tone generator. When this adjustment is made, the output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor, and various decoders (Dolby Digital, Dolby Pro Logic, Dolby Pro Logic , DTS, DTS ES, and...
  • Page 28 ADJUSTING THE SPEAKER OUTPUT LEVELS LEFT RIGHT CENTER LEFT SURROUND RIGHT SURROUND REAR CENTER The test tone is heard from the left main speaker, center speaker, right main speaker, right rear speaker, rear center and left rear speaker in order. The tone is produced for 2.5 seconds each time.

  • Page 29: Basic Playback

    INPUT M0DE NATURAL SOUND AV RECEIVER D I G I T A L STANDBY PRESET/ PRESET TUNING A/B/C/D/E TUNING /TUNING FM/AM MEMORY MODE TUNER SPEAKERS BASS PROCESSOR EXTENSION DIRECT EDIT MAN'L/AUTO FM AUTO/MAN'L MONO PHONES S VIDEO VIDEO AUDIO STEREO PROGRAM EFFECT SILENT...
  • Page 30 BASIC PLAYBACK Start playback or select a broadcast station on the source component. Refer to the operation instructions for the component. Adjust the volume to the desired output level. If desired, use BASS, TREBLE and BASS EXTENSION etc. These controls are only effective for sound from the main speakers.

  • Page 31: Input Modes And Indications

    Input Modes and Indications This unit comes with various input jacks. You can set the priority of the input signal among different types of input signals. When you turn on the power of this unit, the input mode is set according to “8 INPUT MODE” on the SET MENU (see page 59 for details).

  • Page 32: Selecting A Sound Field Program

    BASIC PLAYBACK Selecting a Sound Field Program You can enhance your listening experience by selecting a DSP program. There are 10 programs with sub-programs available with this unit. However the selection depends on the input signal format and not all the sub-programs are possible for all input signal formats.

  • Page 33: Selecting Pro Logic

    Selecting PRO LOGIC You can enjoy the 2-channel sources decoded into five or six discrete channels by selecting PRO LOGIC 6 in the program No. 10. INPUT M0DE NATURAL SOUND AV RECEIVER D I G I T A L STANDBY PRESET/ PRESET TUNING...

  • Page 34: Normal Stereo Reproduction

    BASIC PLAYBACK I Playing the Dolby Digital Matrix 6.1 or DTS ES software Press 6.1/ES to turn on the Dolby Digital Matrix 6.1 or DTS ES decoder to listen to the Dolby Digital Matrix 6.1 and DTS ES software with a rear center speaker. 6.1/ES CHP/INDEX V AUX...

  • Page 35: Digital Sound Field Processing (Dsp)

    The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources in a full circle around the listener.

  • Page 36: Cinema-Dsp

    CINEMA-DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA-DSP integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field programs to provide the surround sound field. It recreates the most complete movie sound design in your audio room. In CINEMA-DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the right and left Main and...
  • Page 37 (3 channels in front and 2 or 3 channels in rear). They also provide two modes; MOVIE/ CINEMA for movies and MUSIC for 2-channel source. These programs use YAMAHA’s tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround and right surround channels.

  • Page 38: Cinema-Dsp Programs

    CINEMA-DSP CINEMA-DSP Programs I For moive programs: No. 8 to 10 According to the input signal format, this unit automatically chooses the appropriate decoder and DSP sound field pattern. Table of Program Names for Each Input Format Input 2 channel Stereo Program MOVIE...
  • Page 39 The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Note • Select the DSP program that you feel sounds best regardless of the name and description given for it below. Program MOVIE Spectacle...

  • Page 40: Tuning

    AM antenna is connected to this unit. A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas.

  • Page 41: Automatic And Manual Tuning

    Automatic and Manual Tuning There are 2 ways of tuning; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. When using the remote control to proceed some of the steps in “TUNING”, make sure the “TUNER” mode is selected.

  • Page 42: Presetting Stations

    TUNING Presetting Stations I Automatically presetting stations (for FM stations) You can use the automatic preset tuning feature to store FM stations. This function enables this unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order.
  • Page 43 I Manually presetting stations You can also store up to 40 stations (8 stations x 5 groups) manually. INPUT M0DE NATURAL SOUND AV RECEIVER D I G I T A L STANDBY PRESET/ PRESET TUNING A/B/C/D/E TUNING /TUNING FM/AM MEMORY MODE TUNER SPEAKERS...

  • Page 44: Tuning In To A Preset Station

    TUNING Tuning in to a Preset Station You can tune any desired station simply by selecting the preset station number under which it was stored. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY PRESET/ PRESET TUNING A/B/C/D/E TUNING /TUNING...

  • Page 45: Basic Recording

    Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY PRESET/ PRESET TUNING A/B/C/D/E TUNING /TUNING FM/AM MEMORY MODE TUNER SPEAKERS BASS...

  • Page 46: Remote Control Features

    REMOTE CONTROL FEATURES The remote control can operate other A/V components of YAMAHA and other manufacturers as well as this unit. To control those components, you must set up remote control with the manufacturer codes. This remote control also has a sophisticated Learn feature. The Learn feature allows it to acquire functions from the remote controls of other components in your system (or other household appliances) equipped with an infrared remote control receiver.

  • Page 47: Setting The Manufacturer Code

    TV VOL Manufacturer TV MUTE – SELECT PRESET PRESET YAMAHA TV VOL – – YAMAHA YAMAHA If you want to change a library (component – category), press j / i. You can set a different –...

  • Page 48: Programming A New Remote Control Function (Learn Feature)

    REMOTE CONTROL FEATURES Programming a New Remote Control Function (Learn Feature) If you want to program functions not included in the basic operations covered by the manufacturer code, or a manufacturer code is not available, the following procedure needs to be performed. The possible programming area is the same as a component control area, so the buttons are programmable independently for each source component area.

  • Page 49: Changing The Source Name In The Display Window

    Changing the Source Name in the Display Window You can change the name that appears in the display window on the remote control if you want to use the different name from the original input selector button names. This is useful when different component is set in the input selector button.

  • Page 50: Clearing Learned Functions, Renamed Source Names, And Setup Manufacturer Codes

    REMOTE CONTROL FEATURES Clearing Learned Functions, Renamed Source Names, and Setup Manufacturer Codes Press an input selector button or Å to select the area for which you want to clear the name, function or manufacturer code. SYSTEM POWER STANDBY SLEEP PHONO TUNER V-AUX...

  • Page 51: Each Component Control Area

    Each Component Control Area The general operational buttons are shown for each area. Some of them may not function depending on the component you have. After setting the manufacturer code, press an input selector button or Å, or SELECT k / n to select a component you want to control.
  • Page 52 REMOTE CONTROL FEATURES I Operating a TV/digital TV (D-TV/ LD area) or a cable TV/satellite TV (CBL/SAT area) TRANSMIT RE–NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP 6CH INPUT PHONO TUNER V-AUX CBL/SAT MD/TAPE CD-R D-TV/LD VCR 1 VCR2/DVR SELECT POWER POWER POWER (Pause)
  • Page 53 I Operating a CD player (CD area) TRANSMIT RE–NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP 6CH INPUT PHONO TUNER V-AUX CBL/SAT MD/TAPE CD-R D-TV/LD VCR 1 VCR2/DVR SELECT POWER POWER Pause DISC SKIP AUDIO DISC SKIP Skip backward – Search backward LEVEL SET MENU MUTE...
  • Page 54 REMOTE CONTROL FEATURES I Operating an tape deck (MD/TAPE area) TRANSMIT RE–NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP 6CH INPUT PHONO TUNER V-AUX CBL/SAT MD/TAPE CD-R D-TV/LD VCR 1 VCR2/DVR SELECT POWER POWER Pause Record AUDIO DISC SKIP Direction A –...
  • Page 55 Å and the function for each button differs depending on the component. YAMAHA LD player is factory-set in Å. However if you want to set other component, set the manufacturer code for the component you want to set in the Å button following the manufacturer code setting procedure described on page 43.

  • Page 56: Set Menu

    ADVANCED OPERATION The SET MENU consists of 14 items including the speaker mode setting, center graphic equalizer and parameter initialization features. Choose the appropriate item and adjust or select the values as necessary. • You can adjust the items on the SET MENU while playing a source.

  • Page 57: Speaker Set (Speaker Mode Settings)

    Depending on the item, press u/d to select a sub item. TV VOL TV MUTE – SELECT PRESET PRESET TV VOL – Press j / i repeatedly to change the setting of the item. TV VOL TV MUTE – SELECT PRESET PRESET TV VOL...
  • Page 58 SET MENU NONE Select this if you do not have a center speaker. All of the center channel signal are directed to the left and right main speakers. I 1B MAIN SP (main speaker mode) The OSD shows large or small main speakers depending on how you set this item.
  • Page 59 I 1D REAR CT SP (rear center speaker mode) By adding a rear center speaker to your speaker configuration, this unit can provide more realistic front- to-back and transitions. The initial setting is “LRG”. Choices: LRG (large), SML (small), NONE Initial setting: LRG Select this if you have a large rear center speaker.

  • Page 60: Low Frq Test

    SET MENU I 1F MAIN LEVEL (main level mode) Change this setting if you cannot match the output level of the center, rear (L/R) and rear center speakers with the main speakers because of the unusually high-efficiency performance of the main speakers. Choices: Normal, –10 dB Initial setting: Normal Normal...

  • Page 61: R Balance (Balance Of The Left And Right Main Speakers)

    Adjust the volume of the subwoofer with the controls on the subwoofer so it matches that of the speaker you are comparing it to. I About the test tone The test tone is produced by the tone generator. The tone generator produces a narrow-band noise centered on a specified frequency by the band pass filter.

  • Page 62: Input Rename

    SET MENU 6 INPUT RENAME Use this feature to change the name of the input which appears on the OSD or the front panel display. Press an input selector button (or use INPUT l / h) to select the input you want to change the name of.

  • Page 63: Input Mode (Initial Input Mode)

    I 7C OPTICAL IN for OPTICAL INPUT jacks (3) to (6) Choices: (3) CD, PHONO, VCR 2/DVR, VCR 1, CBL/SAT, D-TV/LD, DVD, MD/ TAPE, CD-R (4) CD-R, CD, PHONO, VCR 2/DVR, VCR 1, CBL/SAT, D-TV/LD, DVD, MD/TAPE (5) DVD, MD/TAPE, CD-R, CD, PHONO, VCR 2/DVR, VCR 1, CBL/ SAT, D-TV/LD (6) D-TV/LD, DVD, MD/TAPE, CD-R,...

  • Page 64: Param. Ini (Parameter Initialization)

    SET MENU 9 PARAM. INI (parameter initialization) Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group, all of the parameter values within that group revert to their initial settings. Press the corresponding numeric button for the DSP program that you want to initialize.

  • Page 65: 11Dynamic Range

    11 D-RANGE (dynamic range) Use this feature to adjust the dynamic range. This setting is effective only when this unit decodes Dolby Digital signals. Select the “MAX” setting for feature films. Select the “STD” (Standard) setting for general use. Select the “MIN” setting for listening to sources at extremely low volume levels.

  • Page 66: 13Display Set

    SET MENU 13 DISPLAY SET I BLUE BACK Selecting AUTO for the on-screen display setting displays a blue background when there’s no video signal input. Nothing is displayed on the screen including the on- screen display if OFF is selected. Choices: AUTO, OFF Initial setting: AUTO I OSD SHIFT (OSD off-set position)

  • Page 67: Adjusting The Level Of The Effect Speakers

    ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS You can adjust the output level of each effect speaker (center, left and right rear and subwoofer) while listening to a music source. Adjustment should be made with the remote control. TRANSMIT RE–NAME CLEAR LEARN SYSTEM...

  • Page 68: Sleep Timer

    Use this feature to automatically set this unit in the standby mode after the amount of time you have set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off the external components connected to AC OUTLET(S).

  • Page 69: Zone 2 (U.s.a., Canada And Australia Models Only)

    REMOTE CONTROL OUT • Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter. Up to 6 This unit YAMAHA components can be connected as shown.
  • Page 70 ZONE 2 I Special considerations when using DTS software The DTS signal is a digital bitstream. Therefore, if you attempt to send the DTS signal to the second room, you will only be able to hear the digital noise sound that could damage your speakers. Due to this characteristic of DTS encoded discs, the following considerations and adjustments need to be made.

  • Page 71: Sound Field Program Parameter Editing

    In each program, these parameters are set with values precisely calculated by YAMAHA to create a sound field unique to the program. It is recommended to use DSP programs without changing the values of parameters; however, this unit also allows you to create your own sound fields.

  • Page 72: Changing Parameter Settings

    SOUND FIELD PROGRAM PARAMETER EDITING Changing Parameter Settings You can enjoy good quality sound with the factory-set parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room. Adjustments should be made with the remote control.

  • Page 73: Digital Sound Field Parameter Descriptions

    DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program. I INIT. DLY (Initial Delay) [P.
  • Page 74 DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS I LIVENESS Function: This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections decay. Description: The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces than in one which has highly reflective surfaces.
  • Page 75 I REV. TIME (Reverberation Time) Function: This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an extremely wide range.
  • Page 76 DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS For 6ch Stereo I CT LEVEL (Center Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode. I RL LEVEL (Rear Left Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode. I RR LEVEL (Rear Right Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode.

  • Page 77: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit in the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. I General...
  • Page 78 TROUBLESHOOTING Problem Only the speaker on Incorrect cable connections. one side can be heard. Incorrect setting of “3 L/R BALANCE” on the SET MENU. No sound from the The sound effect is off. effect speakers. A Dolby Surround, Dolby Digital or DTS decoding DSP program is being used with material not encoded with Dolby Surround, Dolby Digital or DTS.
  • Page 79 Problem The volume level is low The record is being played on a turntable while playing a record. with an MC cartridge. The volume level The component connected to the REC cannot be increased, or OUT jacks of this unit is turned off. the sound is distorted.
  • Page 80 TROUBLESHOOTING I Tuner Problem FM stereo reception is The characteristics of FM stereo noisy. broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. There is distortion, and There is multipath interference. clear reception cannot be obtained even with a good FM antenna.
  • Page 81 I Remote control Problem The remote control Wrong distance or angle. does not work nor function properly. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. The internal microcomputer has “frozen”.

  • Page 82: Glossary

    Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses YAMAHA original sound field technology to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the visual and audio experience of movie theater in the listening room of your own home.

  • Page 83: Virtual Cinema Dsp

    I Virtual CINEMA DSP YAMAHA has developed a virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects even without any rear speakers by using virtual rear speakers. It is even possible to enjoy virtual CINEMA DSP in a minimum two-speaker system that does not include a center speaker.

  • Page 84: Specifications

    YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...

This manual is also suitable for:

Htr-5490

Table of Contents