Yamaha RX-V1400 Owner's Manual page 67

@ [fl @00 RX-VI4OI)U EN.book Page 63 Thursday, July lU, 20(13
12:17 AM
I;llrl[olll=ltloJ_TIl:fOJIl_'-|llJ:l_l •I
+
You can clear all changes made in each function set, such
as learned functions, renamed source names and setup
manufacturer codes.
1
Press CLEAR by using a ballpoint pen or
similar object.
Complete each of the tol!owing steps in 30 seconds. Other
wise, the learning mode will be automatically canceled. In
this case, press CLEAR
again.
2 Press A / V to select the clear mode.
3
L_ ; [)t.J[) (L: name of a component)
Clears all learned functions in the respective
component control area. Press an input selector
burton {o select the component.
L.; n[']P Clears all learned fimctions tor this unit's control
area.
L.; nL.L. Clears all learned functions.
P, N n[']E Clears all renamed source names.
FCTRY Clears all remote functions and returns the remote
to the factory settings.
Press and hold CLEAR again for about 3
seconds.
"C:OK" appears in the display window.
_i i/_ii n _ ii:iiiiiil
{ !J E R
• Clearing a learned function
You can clear the function learned in a certain
programmed button in each area.
Press an input selector button to select the
source component containing the function
you want to clear.
The selected component name appears in the display
window.
2
Press LEARN using a ballpoint pen or similar
object.
"LEARN" and the selected component name appear
alternamly in Ihe display window.
- l
r., II F_
Complem each of the _\)llowing steps in 30 seconds.
Otherwise the learning mode will be automatically canceled.
In this case, press LEARN again.
3
Press and hold CLEAR using a ballpoint pen
or similar object, then press the button you
want to clear for about 3 seconds.
"C:OK" appean_ in the display window.
+
"C:NG" appears in the display window it' the operation is
unsuccessful. In this case, start over from step 2.
4
Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function for a
button, the button reverts to the factory setting.
•
"ERROR" appears in the display window under the tollowing
circumstances:
-- When a button other than the cursor is pressed.
-- When more than one button is pressed at once.
When you clear a learned function, the button reverts
to the factory setting (or to the manufacturer setting if
you have set manufacturer codes).
4
Repeat step 3 to clear other learned
functions.
5 Press LEARN again to exit.
63