Yamaha RX-V1400 Owner's Manual page 7

_ @0(t RX-VI40I)U EN.book Page 3
Thursday, July 10, 2003 12:17 AM
Please check 1hat you received all of the following parts.
Remote control Batteries (4)
(AAA, R03, UM-4)
+
©©©0
© ©'_©
N No5
[ZZ3 [553_ _ _
OI
Speaker terminal wrench
Optimizer microphone*
Power Cord
(U.S.A., Canada and Europe models)
75-ohnd300-ohm antenna adapter
(U.K. model only)
* The optimizer microphone is
sensitive to heat.
-- Keep it away from direct
sunlight.
-- Do not place it on top of this unit.
AM loop antenna
Indoor FM antenna
(U.S.A., Canada, China,
Korea, Asia and General
models)
(U.K., Europe and
Australia models)
1
Press the _ part and slide the battery
compartment cover off.
2 Insert four supplied batteries (AAA, R03, UM-
4) according to the polarity markings on the
inside of the battery compartment.
3
Slide the cover back until it snaps into place.
Notes on batteries
• Change all of the batteries if you notice the condition like; the
operation range of the remote control decreases, the indicator
does not flash or its light becomes dim.
• Do not use old batteries together with new ones.
• Do not use diflerent types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these di}_rent types of batteries may have the same shape and
coloL
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, elc. Clean the battery compartment thoroughly before
installing new batteries.
If the remote control is without batteries for more than
3 minules, or if exhausled balleries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the manufaclurer code and program
any acquired functions thai may have been cleared.
+
¢