Yamaha RX-V1400 Owner's Manual page 57

_ @00 RX-VI400U EN.book Page 53 Thursday, July lU, 20(13
+
12:17 AM
• Headphone tone control HP TONE ..T_L
Use 1o adjust the amount of bass and treble output to your
headphones.
"Ib access these paramelers, select:
MANUAL SETUP > SOUND MENU > HP TONE CTRL
>
÷ BASS
TRBL _+
0dB
-_+ : Adjust
• Use BASS to adjust the headphone bass level.
• Use TRBL to adjust the headphone treble level.
Choices: _6 to +6 (dB), Initial: 0 dB
•
Audio set
AUDIO SET
Use to customize this units overall audio settings.
"Ib access these paramelers, select:
MANUAL SETUP > SOUND MENU > AUDIO SET
..' ..'HUL,..' u _Ei
÷ _UDIO I_UIE:,,I_UIE:
_UI)IO I)E:L_Y,• @ms
I)I_I.G_I. IF I¸_• ,OFF
•
Presence/surround back channel select
PRiSB,:.h SELECT
You can select to prioritize either the surround back or
presence speakers when playing sources thai contain
surround back channel signals using CINEMA DSP sound
field programs.
MANUAL SETUP > SOUND MENU > PR/SBch SELECT
>
PRch _SBch
-/+ _ 5ete_L
Choices: PRch, SBch
• Select SBch to use surround back speakers when a
surround back channel signal is detected in a CINEMA
DSP program. Presence channel signals will be output
from front speakers.
• Select PRch to use presence speakers even when
surround back channel signals are input. The signals
for the sun'ound back channel will be output from
surround speakers.
Mute
MUTE
Use to adjust how much the mule function reduces the
output volume.
Choices: NUT I_, -20dB
• Select MUTE to complelely halt all output of sound.
• Select-20dB to reduce the current volume by 20dB.
Delay [:,ELAY
Use to delay the sound oulput and synchronize it with the
video image. This may be necessm'y when using certain
LCD monilors or projectors.
Choices: 0 to 240 (ms)
Dialog lift
DIQLG.LIFT
Use to turn on/off the DIALG.LIIq" parameler (see
page 76). This parameter adjusts the height of the front
and center channel sounds (dialog, vocals, etc.) by
assigning some of the front and center channel elements to
the presence speakers.
Choices: ON, OFF
• Select ON to turn on DIALG.LI_ effect.
• Select OFF to turn off DIALG.LIFI" effect.
+
DIALG.L1FT appem's only when PRESENCE is set Io YES
(see page 28).