Yamaha RX-V1400 Owner's Manual page 53

_ @00 RX-VI400U EN.book Page 49 Thursday, July 10,20(13
12:17 AM
Use to manually adjust any speaker setting or compensate
for video signal processing delays when using LCD
monitox:s or projectors. Most of the SOUND parameters
are set automatically when you run auto setup (See
page 24).
L 2UUF_L_MC_'!U
÷ _ SPEAKER SET
B SPEAKER LEUEL
C)SP DIS I_NCE:
I))GR_F Ig E:Q
•
Speaker set
SPERKER SET
Use to manually adjust any speaker setting.
+
Set any THX speakers to SMALL.
MANUAL SETUP > SOUND MENU > SPEAKER SET>
Center speaker
CENTER SP
Choices: LARGE, SMALL, NONE
_.T_n SP
NUNE _I,L I.RG
• Select LARGE if you have a large center speaker. The
unit direcls the entire range of the center channel signal
Io the center speaker.
• Select SMALL if you have a small center speaker. The
unit directs the low-frequency signals of the center
channel to the speakers selected with "BASS OUT".
• Select NONE if you do no1 have a center speaker. The
unit directs all of the center channel signal to the front
left and fight speakers.
Front speakers
FRONT SP
Choices: LARGE, SMALL
PNum SP
• Select LARGE if you have large front speakers. The
unit directs the entire range of the front left and right
channel signals to the front left and right speakers.
• Select SMALL if you have small front speakers. The
unit directs the low-frequency signals of the front
channel to the speakers selected with "BASS OUT".
'- l,
SP
Surround left/right speakers
:.._R L,"R
Choices: LARGE, SMALL, NONE
dKK SP
NUNE
_I,L LRG
• Select LARGE if you have large surround left and right
speakers or if a rear subwoofer is connected to the
surround speakers. The entire range of the surround
channel signal is directed to the surround left and right
speakers.
• Select SMALL if you have small surround left and
right speakers, The low-frequency signals of the
surround channel are directed to the speakers selected
with "BASS OUT".
• Select NONE if you do not have surround speakers,
This will set the unit to the Virtual Cinema DSP m_xte
(see page 34) and automafically set Ihe surround back
speaker setting (SURR B L/R SP below) to NONE.
Surround back left/right speakers
SURR E:L/R SP
Choices: LRGx2, LRGx 1, SMLx2, SMLx 1, NONE
UKK
SP
S_OI. xi _-SI%x2
• Select LRGx2 if you have 2 Imge surround back
speakers. The unit directs the entire range of the
surround back channel signal Io the sun'ound back
speakers.
• SelectLRGxl if you have a large sun'ound back
speaker. The unit directs the entire range of the
surround back channel signal to the left surround back
speaker.
• Select SMLx2 if you have 2 small surround back
speakers. The low-frequency signals of the sun'ound
back channels are directed to the speakers selected with
"BASS OUT".
• Select SMLxl if you have a small surround back
speaker. The low-frequency signals of the surround
back channel are directed to the speakers selected with
"BASS OUT", and the rest of the frequency signals are
directed to the left surround back speaker.
• Select NONE if you do nol have a surround back
speaker. The unit directs all of the surround back
channel signal to the sun'ound left and right speakers.
If you select LRGx l or SMLx I, connect a speaker to the left:
SURROUND BACK speaker terminals.
+
¢
49