Remote Control - Yamaha YHT-670BL Owner's Manual

Check that y ou received allofthe follovdng parts.
Remote control
DD_
@@@6
t........................................
N
&
OYAMAHA
Batteries (2)
(AA, R6, UM-3)
Indoor FM antenna
(U.S.A., Canada and
China models)
AM loop antenna
Indoor FM antenna
(Australia model)
1
2
Take off the battery compartment cover.
Insert the two supplied batteries
(AA, R6, UM-3) according to the polarity
markings (+ and -) on the inside of the
battery compartment.
Snap the battery compartment cover back
into place.
• Change all of the batteries if you notice the lollowing
conditions:
the operation range of the remote control decreases.
the TRANSMIT indicator does not flash or its light becomes
dim.
• Do not use an old battery together with a new one.
• Do not use diltcrent types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these dilt'erent types of batteries may have the same shape and
color.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly belore
installing new batteries.
• Do not throw away batteries with general house waste: dispose
of them correctly in accordance with your local regulations.
• If the remote control is without batteries lot more than 2
minutes, or if exhatisted batteries remain in the remote controh
the contents of the memory may be cleared. When the memory
is cleared, insert new batteries, set up the remote control code
and program any acquired limctions that may have been
cleared.
3