Connections - Yamaha YHT-670BL Owner's Manual

@ MEMORY (MAN'L/AUTO FM)
Stores a preset station ill the nlemory. Hold down this
button for more than 3 seconds to start automatic preset
tuning (see page 47).
@
TUNING MODE (AUTO/MAR'L)
S'Mtches between :mtonaatic tuning (the AUTO indicator
is turned on) and manual tuning (the AUTO indicator is
turned oft') (see page 45).
@
VIDEO AUX jacks
Input audio and video signals from a portable external
source such as a game console, a video camera or a
portable audio player (see page 23).
_.,#._
To reproduce the source signals input at these jacks, select
"V-AUX" as the input source.
• The audio signals input at the PORTABLE mini .jack take
priority over the ones input at the AUDIO L/R jacks.
• The audio signals input at the DOCK terminal on the rear panel
take priority over the ones input at the VIDE() AUX jacks.
@ VOLUME
Controls the output level of all audio chaunels.
"4¢--
This does not affect the AUDIO OUT (REC) level.
@ C_, PHONES (SILENT CINEMA) jack
Outputs audio signals for private listening w,ith
headphones (see page 33).
._rOJ_Tl l l [Ol i_."]r: y_Tl l ] lll] _t[ti l [OJ_t[_
@ BASS/TREBLE +/-
Adjusts the bass/treble bahmce of tile t¥ont left and right
speakers in conjunction with TONE CONTROL
(see page 32).
@ PROGRAM <_ / c>
Selects sound fiekt programs (see page 32).
@ INPUT MODE
Selects either digital or analog input signals exclusively or
sets this unit to automatically detect the type of input
signals and select the corresponding input signals when
one component is connected via both digital and analog
connections (see page 34).
@ INPUT selector
Selects the desired input source.
@ MULTI CH INPUT
Selects the component conuected to tile MULTI CH
INPUT jacks as the input source (see page 37).
The input source connected to the MULTI CH INPUT jacks takes
priority over the source selected with the INPUT selector on the
front panel (or the input selector buttons on the remote control).
• When you connect headphones, no signals are output at the
SUBWOOFER O1JTPUTjack or the speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
@
SPEAKERS
A/B
Turns on or off the set of flout speakers counected to the
FRONT A and/or B terminals on the rear panel each time
the corresponding button is pressed.
STRAIGHT (EFFECT)
Turns the sound field programs off or on. When tile
"STRAIGHT" mode is selected, 2-channel or nmlti-
channel input signals are output directly from their
respective speakers without effect processing (see
page 38).
@ TONE CONTROL
Selects "BASS" or "TREBLE" to adjust tile tonal bahmce
of the front left and right speakers in conjunction with
BASS/TREBLE +1- (see page 32).
5