Motion Detect - EverFocus EPTZ3600 User Manual

Select NO to disable this function.
i. RETURN: RETURN to the previous menu.

3.6.3. MOTION DETECT

Press Enter key of keyboard to enter MOTION DETECT sub-menu. (see diagram 3.31)
You can set 4 motion areas.
ALARM INPUTS <┘
ALARM OUTPUTS <┘
MOTION DETECT <┘
EXIT
a. Turn the joystick Left or Right to select ON for motion detection. A window as below
pops up.
b. Press Enter key to enter Motion Detection Setting. Use the joystick to select motion
area. Turn the joystick Up or Down to select directions, LEFT, RIGHT, UPPER or LOWER.
Turn the joystick Left or Right to adjust the value of motion area. For Left & Right
directions, it is selectable from 0 to 12. For Upper & Lower directions, it is selectable from
0 to 8. There is a color frame showing you the motion detection area you change. Motion 1
MOTION DETECT INFO
M1: 67 M2: 87
(diagram 3.31)
65
MOTION DETECT 1 OFF
MOTION DETECT 2 OFF
MOTION DETECT 3 OFF
MOTION DETECT 4 OFF
SENSITIVITY 240
INTERVAL TIME (S) 1
EXIT