Motion Detect - EverFocus EPTZ3600 User Manual

a. OUTPUT NUM: Select Output number from 1~2.
b. INPUT1: Select YES to enable Alarm input 1 for the alarm output selected. Select NO
to disable Alarm input 1.
c. INPUT2: Select YES to enable Alarm input 2 for the alarm output selected. Select NO
to disable Alarm input 2.
d. INPUT3: Select YES to enable Alarm input 3 for the alarm output selected. Select NO
to disable Alarm input 3.
e. INPUT4: Select YES to enable Alarm input 4 for the alarm output selected. Select NO
to disable Alarm input 4.
f. MOTION: Select YES to have alarm output triggered when a motion event is detected.
Select NO to disable this function.
g. SYSTEM ERROR: Select YES to have alarm output triggered when system error
occurs. Select NO to disable this function.
h. REMOTE: Select YES to have alarm output triggered when RS485 failure occurs.
Select NO to disable this function.
i. RETURN: RETURN to the previous menu.

3.6.3. MOTION DETECT

Press Enter key of keyboard to enter MOTION DETECT sub-menu. (see diagram 3.37)
You can set 4 motion areas.
66