Table of Contents
Advertisement
4.7.2 Motion
Motion Detection
User can define the motion area to be detected by left clicking the mouse to draw
lines. Every click is an end point of the line. When the detection area is formed,
double click the mouse to have all the lines connected. To remove the selection,
simply right click the mouse, the selected polygon will be deleted.
Press
Press
Press
Press
There are 5 motion trigger areas, which can be distinguished by 5 different colors.
Check Enable checkbox to enable event action.
For each of them, you can set the event action to be activated. Event action can be
set in "Event" section.
Moreover, you can set the Sensitivity level for motion triggered by selecting from
to update the current image.
to have the entire screen selected for motion detection.
to clear all selections.
and click on the polygon, to erase that polygon.
EAN800A/EAN800AW
31
Advertisement
Table of Contents
