Setting Iso - Sony SLT-A35 Instruction Manual

Setting ISO
Sensitivity to light is expressed by the [SO number (recommended
exposure index). The larger the number, the higher the sensitivity.
1
PressISOon thecontrol b utton to
display theISOscreen.
2 Selectthe desired setting with,L_ on thecontrol b utton.
• The larger the number, the higher the noise level.
• If you select [Multi Frame NR], select the desired value with 411_.
e'-
€/a
Rotes _-
• When tile exposure mode is set to AUTO. AUTO+, Sweep Panorama, Scene _.
Selection. or Piclure Effect, 1SO is lixed to AUTO and you cannol select other 1SO
nl.n nl3el's.
_i
• When tile exposure mode is set to P/A/S and IS() is set to [AUTO], IS() is
automatically set between ISO 100 and ISO 1600. _"
• Tile [AUTO] setting is nol provided in exposure mode M. If you change the
exposure mode to M with file [AUTO] setting, it is switched lo [100]. Set the 1SO
according to your shooting conditions.
Multiframenoisereduction ( MultiFrameNR)
The camera automatically shoots multiple images continuously, combines
the images, reduces the noise, and records one image. In Multi Frame NR,
you can select larger [SO numbers than the maximum [SO sensitivity.
The image recorded is one combined image.
Roles
• Press and hold the shutter Button until the continuous shooting stops.
• When [linage: Quality] is set to [RAW] or [RAW & JPEG], this function cannot be
used.
• The flash, D-Range optimizer, and [Auto HDR] cannot be used.
109