Changing The Noisereductionsetting - Sony SLT-A35 Instruction Manual

Changing the noisereductionsetting
When you set the shutter speed to a second or longer (Long exposure
shooting), noise reduction is turned on for the same duration that the shutter
is open.
This is to reduce the grainy noise typical ill a long exposure. When noise
reduction is ill progress, a message appears and you cannot take another
picture. Select [On] to prioritize the image quality. Select [Offl to prioritize
the timing of shooting.
MENUbutton --, a 3 --, [Long Exposure N R]--, [Off]
Notes
•When. .... p osur ........ ,e,s e, toSweep a.or ........ Tel ........... .........
Advance Priority AE, or contimlous shooting, continuous bracketing, [Hand-held
Twilight] ill Scene Seleclion, or .SO is sel to [Multi Frame NR], noise reduc6on is
=a
not perlkmned even whell it is set to [On].
• When lhe exposure mode is sel to AUTO, AUTO+ or Scene Selection, you cannol =."
turn oil noise reduclion. _=
The camera reduces the noise that becomes more noticeable when the "_
camera sensitivity is high.
Select ]Auto] to prioritize the image quality. Select ]Weak] to prioritize the
timing of shooting.
MENUbutton --, a 3 --, [HighISONR]--, Selectthedesired
setting
Notes
• [Weak] is selected automatically lot contimmus shooting or continuous bracketing
images, even when you set it to [Auto].
• When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, Scene
Selection, or Picture Efli_ct, this item is set to [Weak].
• Noise reduction is not performed on RAW images.
147