Specifying DPOF
Using
the camera,
you can specify
the still images
and the number
of
images
to print before
you print
images
at a shop or with your printer.
Follow
the procedure
below'.
DPOF
specifications
are left with
images
after printing.
It is recommended
that you unspecify
them after printing.
1
MENU button --, _ 1 --, [Specify Printing] - -, [DPOF Setup]
--, [Multiple ling.]
2 Selectthe image with,/1_ onthecontrol b utton.
3 Selectthe number o f sheets withthe center of thecontrol
button.
• To unspecify
DPOF, set the number
to "0."
4
PresstheMENUbutton.
5 Select[Enter] withA, thenpress thecenter ofthecontrol
button.
Notes
• You cannot specily DPOF on RAW data liles.
• You can specily any number up to 9.
r/a
171