Sony SLT-A35 Instruction Manual page 18

Role
• The message "Custom WB error" indicates that the value is beyond the expected
range. (When the flash is used (m a subject in close proximity or a subject with a
bright color is in the fl'ame.) If you register this value, the t_a,_ indicator turns yellow
on the recording information display. You can shoot at this point, but it is
recommended that you set the white balance again to get a more correct white
balance value.
Tocallthe custom whitebalance setting
WBon the control button--,
,_,=_ (Custom)
R01e
• If the flash is used when the shutter button is pressed, a custom white balance is
registered with the flash light taken into account. Take pictures with the flash in later
shootings.
118