Sony SLT-A35 Instruction Manual page 7

Fnbutton --+ [] (FlashCompensation) --+ Selectthedesired
setting
Toward +: Makes the tqash level higher.
Toward : Makes the tlash level lower.
Roles
• This item cannot be set when tile exposure mode is set to AUTO, AUTO+, Sweep
Panorama, Scene Selection, or Pictm'e Effect.
• The higher flash eflect may not be visible due to the limited amount nf flash light, if
the subject is outside the maximum range of tile flash, lfthe subject is very close, the
lower flash ef[_ct may not be visible.
Exposure compensalion and flash compensalion
Exposure compensation changes tile shutter speed, aperture, and 1SO sensiti'vity (when
[AUTO] is selected) to perform tile compensation.
Flash compensation only changes the amount of flash light.
MENUbutton --_ a 2 --_ [Flashcontrol] - -_ Selectthedesired
setting
ADI flash
This method controls the lighting of the tqash, factoring in tile
focus distance inlormation and light metering data frnm tile
preqlash. This method enables an accurate tqash
compensation with virtually no effect frnm the reflection nff
the suhject.
Pro-flash TTL This method controls tile amount of llash light depending on
the data only from pre-tqash light metering. This methnd is
susceptible to tile reflection nff the subject.
ADI: Advanced Distance [ntegration
TTL: Through the lens
• When [ADI flash] is selected, using a lens that is provided with a distance
encoder feature can perform more accurate flash compensation by using
more accurate distance information.
1,...
€/a
}
g
=
}
107