Sony SLT-A35 Instruction Manual page 86

• When you print images at a shop, images can be printed with the date if you
ask them to do so.
Thelensgetsfogged.
• Moisture condensation has occurred. Turn off the camera and leave it for
about an hour bet_re using it (page 191).
Themessage "Set Area/Date/Time." a ppears whenyouturnon the
camera.
• The camera has been left unused t_r sometinle with a low battery or no
battery pack. Charge the battery pack and set the date again (pages 30, 192).
If the date setting is lost every time the battery pack is charged, consult your
Sony dealer or local authorized Sony service facility.
Thenumber o f recordable i magesdoes notdecrease o r decreases t woat
atime.
• This is because the compressiou rate and the image size after compression
change depending on the image when you shoot a JPEG image (page 141).
Thesettingis resetwithouttheresetting operation.
• The battery pack was removed when the power switch was set to ON. When
removing the battery pack, nmke sure the camera is turned off and the
access lamp is not lit (pages 15, 21).
Thecamera doesnotworkproperly.
• Turn off the camera. Remox.e the battery pack and insert it again. If the
camera is hot, remove the battery pack, and allow it to cool down bet_re
trying this corrective procedure.
• If an AC Adaptor (sokt separately) is used, disconnect the power plug.
Connect the power plug and turn on the camera again. If the camera does
not work alter doing these solutions, consult your Sony dealer or local
authorized Sony service facility.
186