(Auto Exposure
Corrects the expnsure dif[brence automatically.
Dill.)
(Exposure
Sets the expnsure diflerence,
based on the contrast nt"the
Difference Level)*
subject. Select the nptimal level between 1.0Ev (weak) and
6.0Ev (strong).
For example: When 2.0Ev is selected, three images are
overlaid: an image with
1.0Ev, an image with the correct
exposure, and an image with +l.0Ev.
Ev displayed with _
is the step currently selected.
• Since
the shutter
is released
three times for one shot, be careful
about
the
following:
- Use this function
when
the subject
is motionless
or does not blink.
- Do not recompose.
Roles
• You cannot use this function nn RAW images.
• When the expnsure mode is set to AUTO, AUTO+, Sweep Panorama,
Scene
Selection, or Picture Effect, ynu cannot select [Auto HDR].
• Ynu cannot select [Auto HDR] during Smile Shutter. If you turn on the Smile
Shutter fnnctinn with [Auto HDR] selected, the camera will tempnrarily use with the
DRO setting.
• You canm)t start the next shoot until the capture process is completed al:er ynu
shoot.
• Ynu may nnt obtain a desired eflect depending nn the luminance diftbrence of a
subject and the shooting conditions.
• When the flash is used, this ftmction has little eflect.
• When the contrast nf the scene is low or when camera shake nr subject blur is
occurred, yon may not obtain good HDR images. If the camera has detected a
problem,
_lq
is indicated nn the recorded image to inform you nf this situation.
Shoot again, as necessary, paying attentinn tn the contrast nr blur.
112