Sony SLT-A35 Instruction Manual page 46

Notes
• Be[k)re using an Eye-Fi card, set up the wireless LAN access point and forwarding
destination. Fur details, relier to the operating manual supplied with the Eye-Fi card.
• Eye-Fi cards are sold in the U.S.A, Canada, Japan, and some countries in the ELI (as
of March in 2(tl 0).
• For more in[k)rmation, please contact the manulhcmrer or vendor directly.
• Eye-Fi cards can be used only in the countries/regions where they were purchased.
Llse Eye-Fi cards in accordance with the law of the couutries/regions where you
purchased the card.
• Eye-Fi cards include a wireless LAN function. Do not insert any Eye-Fi cards in the
camera wizen it is prohibited to do so, such as on an airplane. If there is an Eye-Fi
card inserted in the camera, set [Upload Settings] to [Ofl]. DOFF is displayed on the
screen when [Upload Settings] is set to [Off].
• Wizen you use a brand-new Eye-Fi card lor the first time, copy the install file of Eye-
Fi manager recorded on the card to your computer be[k_re formatting the card.
• Llse an Eye-Fi card after updating the firmware to the latest version. For details, relier
to the manual that comes with the Eye-Fi card.
• The power save ftmction of the camera does not work while it is uploading images.
• If BEtl (error) is displayed, remove the memory card and reinsert it, or mrn off then
lurn on the power again. If _[_lltlappears again, the Eye-Fi card may be damaged.
• Wi-Fi network communication may be influenced by other communication devices.
If the communication status is poor, move closer to the access point of the Wi-Fi
network.
• For details on the file types that can be uploaded, relier to the operating instructions
supplied with the Eye-Fi card.
• This product does not support the Eye-Fi "Endless Memory Mode." Make sure that
Eye-Fi cards that you insert into this product have "Endless Memory Mode" turned
off.
146