Sony DCR-TRV40 Operating Instructions Manual page 97

Dubbing only desired scenes - Digital program editing (on tapes)
(1) Insert the tape for playback into your camcorder, and insert a tape fbr
recording into the VCR.
(2) Press MENU and turn tile SEL/PUSH EXEC dial to select VIDEO EDIT in _,
then press tile dial (p. 209).
(3) Turn the SEL/PUSH EXEC dial to select TAPE, then press the dial.
(4) Search fbr tile beginning of the first scene you want to insert using tile video
operation buttons, then pause playback.
You can fine adjust ogle fi'ame at a time with EDITSEARCH.
(5) Press MARK on the Remote Commander, or turn tile SEL/PUSH EXEC dial to
select MARK, then press tile dial.
The IN point of the first program is set, and the top part of tile program mark
changes to light blue.
(6) Search fk,r tile end of tile first scene you want to insert using tile video
operation buttons, then pause playback.
(7) Press MARK on tile Remote Commander, or the SEL/PUSH EXEC dial.
The OUT point of the first program is set, then tile bottom part of tile program
mark changes to light blue.
(8) Repeat steps 4 to 7, then set the program.
When the program is set, tile program mark changes to light blue.
You can set up to 20 programs in maximum.
T
5'
2
5
MENU
3
7
8
97