Sony DCR-TRV40 Operating Instructions Manual page 121

Using a "Memory Stick" - Introduction
To return to FN
Press EXIT.
To execute settings
Press _ OK.
To cancel settings
Press _ (-OFF to return to PAGE1/PAGE2/PAGE3.
Notes
• When using the tourh panel, press operation buttons with your thumb supporting the
LCD screen from the back side of it or press those buttons lightly with your index
finger.
• Do not press tile LCD screen with sharp objects other than the supplied stylus. (DCR
TRV50 only)
• Do not press the LCD screen too hard.
•Do not touch tile LCD screen with wet hands.
• If FN is not on tile LCD screen, touch the LCD screen lightly to make it appear. You
can control the display with DISPLAY/TOUCH PANEL on your camcorder.
• When operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 230).
• When tile LCD screen gets dirty, clean it with the supplied cleaning cloth.
When executing each item
Tile green har appears above the item.
If the items are not available
The color of the items changes to gray.
Press FN to display the following buttons:
In the memory camera
PAGE1 SELFTIMER, SPOT FOCUS, PLAY, INDEX, SPOT METER
PAGE2 LCD BRT, PLAY, INDEX, MEM MIX
PAGE3 SLIDE SHOW, PLAY, INDEX, 9PIC PRINT
In the memory playback
PAGE1 PB ZOOM, CAM, INDEX, DELETE, [BB,
PAGE2 LCD BRT, CAM, INDEX, DATA CODE, EZE, EEE
PAGE3 SLIDE SHOW, CAM, INDEX, 9PIC PRINT, lIB, EEE
o
©
121