Labeling A Cassette - Sony DCR-TRV40 Operating Instructions Manual

Labeling a cassette
If you use a cassette with cassette memory, you can label a cassette. Labels can
consist of up to 10 characters and is stored in cassette memory. When you insert
the labeled cassette and when the POWER switcb is set to CAMERA or VCR, the
label is displayed fur about five seconds.
(1) Insert the cassette you want to label.
(2) Set the POWER switch to CAMERA or VCR.
(3) Press MENU, then turn the SEL/PUSH EXEC dial to select TAPE TITLE in 1_],
then press the dial (p. 205). Tape title display appears.
(4) Turn the SEL/PUSH EXEC dial to select the cohmm of the desired character,
then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired character, then press the
dial.
(6) Repeat steps 4 and 5 until you finish the label.
(7) Turn the SEL/PUSH EXEC dial to select [SET{, then press the dial.
The label is stored in memory.
¢Q
3
CM SET
_READY
_Zr TIT_EERASE
TITLE DSPL ===_
_LJ CM SEARCH
_q TAPE TITLE
/........... I
_RETURN
CM SET
[M _ T_TLE
RASE
TITLE DSPL /
CM SEARCH
,_n ERASE ALL
_[ _2_ -_ _
FGHIJ eTCh0
KLMNO'/-
pabST { ÷ I
{_EN_]END
4---6
TAPE T_TLE _
ABO_E 1_a4_
FGHIJ _8_0
PQ_ST _ /
UVWX¥ _SET]
{MEN_]END
TAPE T_TLE _
ABCDE 1_34_
UVWX¥ [SET1
[MENO]END
TAPE TITLE _
ABCDE _2_4S
UVWX¥ [SET1
[MEN_]END
_PE TITLE _I_
ABCDE _34_
PQ_ST [_
UWX¥ [SET]
[MENO]END
115