Sony DCR-TRV40 Operating Instructions Manual page 93

Dubbing only desired scenes - Digital program editing (on tapes)
(4) Confirming VCR operation
Q}) Insert a recordable tape into the VCR, then set to recording pause.
(_) Turn the SEL/PUSH EXEC dial to select IR TEST, the:: press the dial.
(_) Turn the SEL/PUSH EXEC dial to select EXECUTE, the:: press the dial.
If the VCR starts recording, the setting is correct.
When recording is finished, the indicator changes to COMPLETE.
When the VCR does not operate correctly
• After checking the code in "About IR SETUP codes", set the IR SETUP or the
PAUSEMODE again.
• Place your camcorder at least 30 cm (12 in.) away fl'om the VCR.
• Re%r to the operating instructions of your VCR.
93