Playing
back a tape
Press DISPLAY/TOIdCH PANEL on your camcorder or DISPLAY on tile Remote
Commander supplied with yotn camcorder. The indicators disappear on tile screen. To
make tile indicators appear, press DISPLAY/TOUCH PANEL or DISPLAY again.
DATA CODE
DISPLAY
DISPLAY/
TOUCH
PANEL
About
date/time
and various
settings
Your ranlrol'der automatirally rerol'ds not only images on tile tape but also the
recording data (date/time or various settings when recorded) (data code).
Follow the steps below to display the data code using the touch panel or the Remote
Commander.
Using the touch panel
(!) Set the POWER switch to VCR, then play back a tape.
0 PressFN and select PAGE2.
(_) Press DATA CODE.
_) SelectCAM
DATA or DATE DATA, then press _
OK.
_) PressEXIT.
Using the Remote Commander
Press DATA CODE on the Remote Commander
in the playback.
The display
changes
as fbllows when you press the DATA CODE on the Remote
Commander:
date/time
--_ various
settings
(SteadyShot,
exposure,
white balance,
gain, shutter
speed, aperture
value)
--_ no indicator
42