Sony DCR-TRV40 Operating Instructions Manual page 216

Types of trouble and how to correct trouble
symptom cause and/or CorrectiveActions
The melody oi"beep sonnds for • Moistme rondensation has orrurred.
five seconds. ") Remove the cassette and leave your camcorder fur at
least one bonr to acclimatize (p. 228).
• Some tronbles have occnrred in yotu camcorder.
") Remove tile cassette and insert it again, then operate
your cantcorder.
You cannot charge the battery pack. • Tile POWER switch is not set to OFF (CHG).
") Set it to OFF (CHG) (p. 16).
While
charging tile battery
pack, no
• Tile battery pack
is
not properly
installed.
indicator appears, the indicator ") Install it
properly (p. 15).
flashes in tile
disp[ay window. • Something
is wrong with the
battery pack.
") Please contact your
Sony
dealer" or local authorized
Sony
service
facility.
No flmction works though the • Disconnect tile power cord of the AC power adaptor or
power is on. remove tile batterT, then reconnect it ill about one minute.
Turn tile power on. If the flmctions still do not work, press
tile RESET button using a sharp pointed object (If you
press the RESET button, all the settings including the date
and time return to their delimits.) (p. 15, 19,240).
When you set the POWER switch to • This is because some flmctions use a linear"mechanism.
VCR or OFF (CHG),if you move Your camcorder is not malflmctioning.
your camcorder, yon may hear a
clattering sound from inside your
camcorder.
The buttons do not appear on the • Tile DISPLAY/TOUCH PANEL button is pressed.
touch panel. ") Press the LCD screen ligbtly.
") Press the DISPLAY/TOIdCH PANEL button on your
camcorder or the DISPLAY button on tile Remote
Commander (p. 42).
The buttons on the LCD screen do • Adjust the screen (CALIBRATION) (p. 230).
not work.
The indicators appear mirror • The mirror mode is activated.
reversed ill tile viewfinder or on the This is not a malflmction.
TV screen.
Image data cannot be transferred by • The l ISB cable was connected before installation of the
the USBconnection. USB driver" was completed.
") Uninstall the incorrect USB driver and re install tile USB
driver (p. 179, 182).
• USBCONNECT is set to PTP in tile menu settings when
tile POWER switch is set to MEMORY/NETWORK (DCR
TRVS0 only).
+ Set it to NORMAL (p. 207).
• Moisture has started to condense in your camcorder
(p. 228).
The cassette cannot be removed
even if tile cassette lid is open.
216