Sony DCR-TRV40 Operating Instructions Manual page 92

Dubbing only desired scenes - Digital program editing (on tapes)
(2) Setting the modes to cancel the recording pause on the VCR
@ Turn the SEL/PUSH EXEC dial to select PAUSEMODE, then press the dial.
@ Turn the SEL/PUSH EXEC dial to select tile mode to cancel recording pause
on the VCR, then press the dial.
Refer to the operating instructions of your VCR.
I IIIIED ......
EDIT SET
CONTR®t
A_J TEST
"CUT _N _
"CUT OUT"
_PAUSE
IR TEST
_RETURN
Buttons to cancel recording pause on the VCR
Tile buttons vary depending on your VCR. To cancel recording pause:
Select PAl JSE if the button to cancel recording pause is II.
Select REC if the button to cancel recording pause is O.
Select PB if the button to cancel recording pause is I_.
(3) Setting your camcorder and the VCR to face each other
Locate the infrared rays emitter of your camcorder and f_ce it towards the remote
sensor of the VCR.
Set the devices about 30 cm (12 in.) apart, and remove any obstacles between the
devices.
VCR
Remote sensor
= A/V connecting cable (supplied)
92