Stop The Snow Thrower; Wheel Lockout Pin; Discharge Chute Anddeflector - Snapper 130.887660 Operator's Manual

Mid frame snow thrower
Table of Contents

Advertisement

OPERATION
STOPTHESHOWTHROWER
1. Release t heaugercontrollever(C, Figure4).
2. Release t hetractioncontrol lever(D).
3. PushtheON/OFF switch(A, Figure12) totheOFFpositionand pull
outthesafety key(B).
WARNING: Never run engine indoorsor in an enclosed,
poor ventilated area. Engineexhaust containsCARBON
MONOXIDE,an ODORLESS and DEADLY GAS.
,, Keep hands, feet, hair, and loose clothingaway
from any moving parts on engine and snow
thrower.
,, Temperatureof muffler and nearby areas can
exceed 150°F (66°C). Avoidthese areas.
,, DO NOTallow children or youngteenagers to
operate or be near snow thrower while it is
operating.
WARNING:Read Operator's Manual before operating
machine. This machine can be dangerousif used
carelessly.
,, Never operatethe snowthrower without all guards,
covers, shields in place.
,, Never direct dischargetowards windows or allow
bystandersnear machine while engine is
running.
,, Stop the engine whenever leaving the operating
position.
• Disconnectspark plug before unclogging the
impeller housingor the dischargechute and
before making repairs or adjustments.
,, Whenleaving the machine, remove the safety key.
Toreducethe risk of fire, keep the machine clean
and free from spilledgas, oil, and debris.
WHEELLOCKOUT KNOB
Eachwheel i s secured to theaxlewith a lockoutpin.Theunitwasshipped
withthe lockoutpin in thelockedposition.Foreaseof maneuverability,
disconnect t helockoutpin asfollows.
1. Pull theknob(A, Figure5) out to disengage t helockoutpin.
2. To lock in the disengagedposition, turn the knob1/4 turn
(90 degrees).
Wheel Lockout Knob
Figure 5
DISCHARGE CHUTEAND DEFLECTOR
Discharge
Chute Rotation
(Left/Right)
1. Press thechuterotationswitchto theUPpositionandhold to rotate
thechuteto theleft (A,Figure6).
2. Afterthedesiredpositionis obtained, r elease theswitchto theCEN-
TERpositionto turnoff.
3. Press theswitchto theDOWN positionand holdto rotate clockwise.
Chute Deflector(Up/Down)
1. Press thechutedeflector s witchto theUPpositionand holdto pro-
videa higherstream andgreater d istance(B,Figure6).
2. Afterthedesiredpositionis obtained, r elease theswitchto theCEN-
TERpositionto turnoff.
3. Press theswitchto theDOWN positionand holdto provide a lower
stream and lessdistance.
Discharge Chute and Deflector
Figure6
13

Advertisement

Table of Contents
loading

Table of Contents