Stop The Snow Thrower; Traction Lock Pins - Snapper mid frame Snowthrower Operator's Manual

STOP THE SNOW THROWER

1. Release the auger control lever (B B , Figure 4).
2. Release the traction control lever (C C ).
3. Push the ON/OFF switch (A A , Figure 13) to the OFF position and pull
out the safety key (B B ).
WARNING: Never run engine indoors or in an enclosed,
poor ventilated area. Engine exhaust contains CARBON
MONOXIDE, an ODORLESS and DEADLY GAS.
• Keep hands, feet, hair, and loose clothing away
from any moving parts on engine and snow
thrower.
• Temperature of muffler and nearby areas can
exceed 150°F (66°C). Avoid these areas.
• DO NOT allow children or young teenagers to
operate or be near snow thrower while it is
operating.

TRACTION LOCK PINS

The right traction wheel can be completely released using the locking pin
(A A , Figure 5). This allows the unit to be easily moved with the engine off.
WARNING: Read Operator's Manual before operating
machine. This machine can be dangerous if used
carelessly.
• Never operate the snow thrower without all guards,
covers, shields in place.
• Never direct discharge towards windows or allow
bystanders near machine while engine is
running.
• Stop the engine whenever leaving the operating
position.
• Disconnect spark plug before unclogging the
impeller housing or the discharge chute and
before making repairs or adjustments.
• When leaving the machine, remove the safety key.
To reduce the risk of fire, keep the machine clean
and free from spilled gas, oil, and debris.
A
Traction Lock Pins
13
OPERATION
Figure 5