Threading The Top Thread - Singer futura CE-200 Instruction Manual

THREADING THE TOP THREAD
A. Raise the presser foot lifter. Always be sure to raise the presser
foot lifter before threading the top thread. (If the presser foot
lifter is not raised, correct thread tension cannot be obtained.)
B. Turn the hand wheel toward you until the needle is in its
highest position and the thread take-up is visible.
/
/ I
C. Thread the machine in the following order as illustrated.
* Guide the thread through thread guide (1), and then pull it
down along the groove.
* Do a U-turn around the inside of the tab (2).
* Pass the thread through the thread take-up (3) from right to
left.
* Insert the thread into the inside of the groove (4).
* Guide the thread into the thread guide (5).
* Pass the thread through the eye of the needle (6) from front
to back.
Thread take-up
Releveur de fil
",, Tria- hilos
\
|
I ........ Tab
Languette
LengOeta
/
,/
24