RESTRICTED USE ONLY
Dye-Sub and Resin Intensity Adjustments
Reviewing the RP1 Potentiometer location (Printhead Darkness RP1
Pot)
RP1 is the baseline level control for the Printhead intensity.
Step
Procedure
1
a. Turn the RP1 potentiometer counter-clockwise in 1/8
increase the overall darkness level, and affect both Dye-Sub and Resin
transfer levels.
b. Turn the pot clockwise by the same amount, which causes the output to lighten
the intensity.
2
a. When the Printhead is replaced or if using another brand of blank cards, run
the self-test. See the Performing the Standard Self Test procedure on page
57.
b. Use the results of the Standard self test to make appropriate adjustments to
the RP1 potentiometer.
Persona® C25 Card Printer User Guide (Rev. 4.0)
DARKNESS
Rp7
Rp1
OFFSET MAG
Tp3
Tp5
COLOR
FARGO Electronics, Inc.
th
turn increments to
OFFSET PRN
Rp6
RP3
OFFSET LAM
65