Printer Components: Resin-Only Print Ribbons - FARGO electronics S000256 User Manual

RESTRICTED USE ONLY

Printer Components: Resin-Only Print Ribbons

Resin-only print ribbons consist of a continuous roll of a single resin color. (Note: No
protective overlay panel (O) is provided since resin images do not require the protection of
such an overlay.)
Type
Standard Resin Black
(K) (provides 1,000
prints)
Premium Resin Black
(K) (provides 1,000
prints)
Colored Resin
(provides 1,000 prints)
Metallic Resin
(provides 1,000 prints)
Scratch-Off Resin
(provides 1,000 prints)
Persona® C25 Card Printer User Guide (Rev. 4.0)
Description
This ribbon provides high resin durability ideal for most general
purpose, monochrome ID card applications.
Resin black bar codes are readable by both infrared and visible-
light bar codes scanners.
This ribbon provides maximum resin durability that is ideal for
applications such as access control where cards are repeatedly
swiped through a Magnetic Stripe reader.
Resin black bar codes are readable by both infrared and visible-
light bar codes scanners.
Colored resin ribbons are available in different colors for
customizing or color-coding resin-only ID cards.
Metallic resin ribbons are available for printing resin images with
a unique metallic sheen.
A scratch-off resin ribbon is available for printing over areas of a
pre-printed card in order to hide specific information such as a
personal identification number.
FARGO Electronics, Inc.
18