Cleaning The Card Feed Rollers - FARGO electronics S000256 User Manual

RESTRICTED USE ONLY

Cleaning the Card Feed Rollers

The Card Feed Rollers move the card throughout the print process.
Caution: Clean these Rollers to prevent card jams and card contamination, and to
provide better print quality and extended Printhead life.
Step Procedure
1 a. Ensure consistent Printer operation by cleaning these Rollers
approximately every 250 prints or as needed depending on the cleanliness
of the card stock and the environment in which the Printer is located.
b. Clean if the Rollers appear dirty or if the cards start showing speckles or
debris on the printed surface.
c. Refer to Steps 2 to 5 (in this procedure) to clean all these Rollers through
a single, easy process:
2 a. Open the Printer's Top Cover, and remove all card, print ribbon, from the
Printer.
b. Leave the Printer power ON and the Top Cover open throughout this
procedure. (Note: The Card Cleaning Cartridge can also remain within
the Printer during this cleaning process.)
3 Get a Cleaning Card from the Printer Cleaning Kit, and remove its adhesive
backing paper.
Persona® C25 Card Printer User Guide (Rev. 4.0)
Continued on the next page
Card Feed Rollers
FARGO Electronics, Inc.
133