Resolving The Data Intended For The Magnetic Stripe (Printed On The Card) Problem - FARGO electronics S000256 User Manual

RESTRICTED USE ONLY
Resolving the Data intended for the Magnetic Stripe (printed on the
Card) problem
Step Procedure
1 Confirm that the application is formatting the magnetic string correctly. See
Using the Magnetic Track Selection option on page 72.
2 a. Use WordPad (a Windows 95/ 98/ ME/ NT/ 2000/XP word processing
program in the Accessories Program Group), as shown on the next page.
b. Go to the File menu and select Page Setup.
c. Click on the Printer button and select the Persona C25 Card Printer.
d. Click on OK and reset all four margins to zero. (Note: WordPad will
automatically replace the values with its minimum margins.)
e. Open the program and type: "~1%JULIEANDERSON^1234567890?" then,
go to File on the menu bar and select Print. (Note: The Printer should then
feed a card into the Encoder and magnetically encode it.)
Persona® C25 Card Printer User Guide (Rev. 4.0)
FARGO Electronics, Inc.
45