FARGO electronics S000256 User Manual page 24

RESTRICTED USE ONLY
Reviewing the Top Line LCD Messages (continued)
Message Cause
Head-up Failed Printhead is unable to raise itself.
Invalid Key The SmartGuard Access Card is
Card invalid or is inserted backwards or up
side down.
Appears only when using the
SmartGuard Security Feature.
Invalid An invalid SmartGuard password was
Password entered.
Appears only when using the
SmartGuard Security Feature.
Key Card Indicates SmartGuard or SmartShield
Ready data has successfully been encoded
onto the SmartGuard Access Card.
Appears only when using the
SmartGuard Security Feature.
Key Disabled Indicates the SmartGuard Security
Feature has been disabled.
Appears only when using the
SmartGuard Security Feature.
Key Not Attempts are made to print without the
Inserted SmartGuard Access Card inserted.
Appears only when using the
SmartGuard Security Feature.
Key Card Indicates the data on the SmartGuard
Deleted Access Card was successfully deleted.
Appears only when using the
SmartGuard Security Feature.
Persona® C25 Card Printer User Guide (Rev. 4.0)
FARGO Electronics, Inc.
Solution
See the Resolving the Headlift
error message procedure on
page 40.
Insert a valid SmartGuard
Card or reinsert the card
properly with the chip end
down and facing you. See the
SmartGuard User's Guide for
more information.
Re-enter the correct password
using any of the standard
keyboard characters. See the
SmartGuard User's Guide for
more information.
See the SmartGuard User's
Guide for more information.
See the SmartGuard User's
Guide for more information.
Insert a valid SmartGuard
Access Card. See the
SmartGuard User's Guide for
more information.
See the SmartGuard User's
Guide for more information.
Continued on the next page
24