FARGO electronics S000256 User Manual page 167

RESTRICTED USE ONLY
Reviewing the Glossary of Terms (continued)
Term
Oversized Cards
Overlaminate
Parallel
Parallel Port
PC (Personal
Computer)
PCB (Printed Circuit
Board)
Peel
Peel-Off
Peripheral
Persona® C25 Card Printer User Guide (Rev. 4.0)
Definition
Oversized cards are used for more efficient visual identification
and are available in many non-standard sizes. The most popular
sizes are CR-90 (3.63" x 2.37"/92mm x 60mm) and CR-100 (3.88"
x 2.63"/98.5mm x 67mm).
Protective clear or holographic material to increase security and
durability applied over the printed surface with a hot Roller.
A method of data transfer in which serial data is divided into
sections, and sent simultaneously down parallel wires to speed
transfer rate.
A communication socket on a device that allows for parallel data
transfer.
A stand-alone, programmable, electronic device that can store,
retrieve, and process data consisting of a CPU, mouse, keyboard,
and monitor.
A solid, multi-layered plate on which electronic elements are
attached, either through the board or on the surface.
The removal of a film or ribbon from a card surface (at a
perpendicular angle) to ensure proper transfer, then separation,
from the card surface.
A bar on the section that holds the film at the correct position and
provides proper peel angle.
Any device that is attached externally to a PC. These often share
the same data cable or port as a Printer and may be the source of
communication problem.
FARGO Electronics, Inc.
Continued on the next page
167