FARGO electronics S000256 User Manual page 25

RESTRICTED USE ONLY
Reviewing the Top Line LCD Messages (continued)
Message Cause
Low Indicates the print ribbon will soon run
Ribbon/Clean out.
Mag encoding Indicates the Mag Stripe is being
encoded.
Mag Verify The Mag Stripe was not encoded
Error properly.
No Shield Attempts are made to print with the
Loaded Printer Driver's SmartShield option
selected (even though the optional
SmartGuard Security Feature is not
used).
OR
If using the SmartGuard feature, the
SmartShield image is not encoded
onto the SmartGuard Access Card
(currently inserted into the Printer).
Print Cover Indicates that the top-right cover is not
Open properly shut.
Persona® C25 Card Printer User Guide (Rev. 4.0)
FARGO Electronics, Inc.
Solution
See the Resolving the Ribbon
Low error message procedure
on page 42.
No action is required.
See Resolving the Mag Verify
error message on page 44.
If using the SmartGuard
feature, insert an access card
that contains a SmartShield
image or encode a
SmartShield image onto the
current card and try your print
job again. If you do not want
to print a SmartShield image,
deselect the Printer Driver's
SmartShield option. See the
SmartGuard User's Guide for
more information.
Check that nothing is blocking
the cover from being shut and
close the cover.
Continued on the next page
25