Using The Gui-Based Installer - Dell Brocade Adapters Installation And Reference Manual

Brocade adapters installation and reference manual
Hide thumbs Also See for Brocade Adapters:
Table of Contents

Advertisement

NOTE
The storage driver will claim all installed Brocade Fiber Channel HBAs, FCoE CNAs, and Fabric
Adapter ports configured in HBA or CNA mode installed in a host system.
RHEL 6.x version x64 systems
The Brocade Adapter Software Installer and HCM are 32-bit applications. To use these applications
on Linux RHEL 6.x version x64 systems, you must install the x32-compatible libraries because they
are not installed by default.
To install these libraries, use the following steps.
1. Install glibc.i686 or select "Compatibility Libraries" under "Base System" when installing RHEL
2. Install the following RPMs once you install RHEL 6.x:

Using the GUI-based installer

The Brocade Adapter Software Installer (BASI) GUI-based application or commands are the
preferred methods to install the following components on your host system:
This application operates on systems specified under
command-line version of this application, refer to
commands"
The Adapter Software Installer installs HCM, all driver packages, and management utilities based
on your host operating system. The HCM Agent starts automatically after installation. You can also
install software components using software installer scripts and "native" system commands (refer
to
"Using software installation scripts and system commands"
Brocade Adapters Installation and Reference Manual
53-1002144-01
6.x.
NOTE
These RPMs should be available under the Packages folder on the RHEL 6.0 or 6.1 DVD.
libX11-*.el6.i686.rpm
libXau-*.el6.i686.rpm
libXext-*.el6.i686.rpm
libXi-*.el6.i686.rpm
libXtst-*.el6.i686.rpm
libxcb-*.el6.i686.rpm
nss-softokn-freebl-*.el6.i686.rpm
glibc-*.el6.i686.rpm
Storage and network drivers
Management Utilities. These include the HCM agent, BCU, BASI, installation scripts, CIM
provider, and SNMP agent files.
HCM only
on page 76.
Using the Brocade Adapter Software Installer
Table 9
on page 44. To use the
"Software installation using Software Installer
on page 89).
3
69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade 825

Table of Contents